Thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instructions
1. safeTy
warNING!
read operating instructions before use.
9
check capacity and maximum inflation pressure of inflatable before commencing inflation.
9
monitor the pressure gauge while in operation. the gauge should be used as an indication of pressure only. We recommend the use of
9
a dial pressure gauge for definitive reading.
warNING! Do NoT inflate any item beyond its maximum capacity.
Do NoT carry by the hose, or yank the hose from an inflation valve.
8
Do NoT use the pump for a task it was not designed to perform.
8
Do NoT operate the pump when you are tired, under the influence of alcohol, drugs or intoxicating medication.
8
Do NoT operate the pump if any parts are missing as this may cause failure or possible personal injury.
8
Keep children and non essential persons away from the inflation area.
9
Keep the pump clean and in good condition.
9
replace or repair damaged parts.
9
2. INTroDuCTIoN
durable construction with chrome plated steel upright tube. dial type high pressure gauge with rotating bezel. Gauge calibrated in psi and bar
with ranges from 0-160psi and 0-8 bar. fitted with twin head for both Presta and schrader valves and a 360° rotatable hose. features a wide
base for added stability with foldable foot stand. supplied with accessories for inflating items such as small inflatable boats, air beds and balls
stored in a compartment located in the handle.
3. speCIfICaTIoN
model no ................................................................ Bc110.V2
4. operaTIoN
fig.1
maintenance
© Jack sealey limited
instructions for
workshop pump
BC110.V2
model no:
fig.2
Original Language Version
fig.3
Bc110.V2 | issue 1 15/09/16