Protecting The Data On "Memory Stick" Media - Sony CLIE PEG-TG50 Handbook

Using "Memory Stick™" media
• If the battery of your CLIÉ handheld is running short, an error message is
displayed and you cannot exchange data with "Memory Stick" media. If this
occurs, connect the AC power adapter or fully charge your CLIÉ handheld.
• Use the CLIE Files application to format the "Memory Stick" media you use
in your CLIÉ handheld. If you format it using another application, further
operation with your CLIÉ handheld is not guaranteed.
• If you insert "Memory Stick" media that has been formatted by another
application, a message prompting you to format it is displayed. To use
"Memory Stick" media in your CLIÉ handheld, follow the instructions to
format it. Note, however, that all stored data will be erased.
• Make sure to stick a dedicated label on the "Memory Stick" media.

Protecting the data on "Memory Stick" media

To prevent accidental erasure of important data, you can use the write protect
tab of "Memory Stick" media.
Write enable position
Slide the tab to the left to select the write enable position. You can read and
write data on the "Memory Stick" media.
Write protect position (LOCK)
Slide the tab to the right to select the write protect position. You can only read
the data in the "Memory Stick" media. Select the write protect position when
you insert "Memory Stick" media containing any important data that you do
not want to accidentally delete or overwrite.
Back side
LOCK
Tip
Shape or exact location of the tab may differ from the illustration.
Using "Memory Stick™" media
Write Protect
Write Enable
Position
Position
130