My Clié Handheld Does Not Respond; My Clié Handheld Keeps Turning Itself Off; My Clié Handheld Does Not Produce Any Sounds - Sony CLIE PEG-UX40 Frequently Asked Questions Manual

My CLIÉ handheld does not respond
B The POWER/HOLD switch of your CLIÉ handheld is in HOLD mode.
Your CLIÉ handheld does not operate when the POWER/HOLD switch
is in HOLD mode. Make sure you release HOLD mode.
B The CLIÉ handheld is placed near the IR port of your computer.
Move your CLIÉ handheld away from the IR port of your computer
except when performing the IR HotSync
may occur. You can also disable the IR feature by selecting [Off] next to
[Beam Receive:] in [General] of Preferences.
B Perform a soft reset by pressing the RESET button.
b
For details, refer to "Basic operations of your CLIÉ™ handheld: Restarting your
CLIÉ™ handheld" in the supplied "Read This First (Operating Instructions)".
My CLIÉ handheld keeps turning itself off
B Your CLIÉ handheld is designed to turn itself off after a period of
inactivity (Automatic power-off). You can set the automatic power-off
time by selecting [Auto-off After:] in [General] of Preferences.
b
For details, refer to "Customizing your CLIÉ™ handheld (Preferences):
Setting the automatic
B Did you set [After a preset delay] from [Auto Lock Handheld:] in
Security?
It you set [After a preset delay] from [Auto Lock Handheld:], your CLIÉ
handheld may turn off after a shorter period even if you set the automatic
power-off time.
b
For details, refer to "Protecting your data with a password: Locking your CLIÉ
handheld with a password (Data protection)" in the supplied "Handbook".
My CLIÉ handheld does not produce any sounds
B Tap [General] of Preferences and check that [System Sound:] is not set
to [Off].
b
For details, refer to "Customizing your CLIÉ™ handheld (Preferences):
Setting sounds" in the supplied "Handbook".
14
power
-off time" in the supplied "Handbook".
®
operation, as a malfunction