Panasonic KX-HN3001W Operating Instructions Manual page 13

3
Drive the supplied screw into the camera
unit.
1
Supplied screw (page 9)
1
4
Drive the screws (not supplied) into the
wall.
Longer than 20 mm (
2
Space 1.3 mm (
3
2
Note:
R Use the following template when
determining the location of the screw
holes.
31 mm
7
(1 / inches)
32
5
Mount the camera unit to the wall.
Screws
4
31 mm (1 7 /
5
32
For assistance, please visit http://shop.panasonic.com/support
HN3001̲(en̲en)̲0215̲ver.520.pdf 13
25
/ inches)
32
1
/ inches)
32
3
inches)
5
4
Getting Started
6
Adjust the angle of the camera unit by
using MFN, MEN, MDN, or MCN on the monitor
unit.
Reattaching the camera base
1
Take the camera unit off from the wall.
2
Remove the screw and then remove the
wall mounting adaptor from the camera
unit.
1
Supplied screw (page 9)
1
3
Attach the camera base to the camera
unit.
4
Drive the supplied screw into the camera
unit.
1
Supplied screw (page 9)
1
13
2018/02/15 10:07:59