Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 INSTRUCTIONS FOR SAFETY Adjusting the height of loaded upper basket ............25 AND ENVIRONMENT Height setting with empty basket ..26 General safety ..........4 Intended use ..........4 5 OPERATING THE PRODUCT 27 Children’s safety .......... 5 Preparing the machine ......28 Disposing of packaging material ....
instructions for safety and environment This section contains safety electric shock! instructions that will help to Never touch the plug with • get protected from risk of wet hands! Never unplug by personal injury or property pulling on the cable, always damage.
instructions for safety and environment It must be used to do the Keep children away from the • domestic type dishes only. product when it is in use. Do This appliance is intended not let them to tamper with • to be used in household and the product.
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be...
Installation Aquasafe+ Permitted water temperature: up to 25°C (depends on model) The dishwasher may not be connected to The Aquasafe+ system protects against open warm water devices or flow-through water leaks that may occur at the hose water heaters. inlet.Water contact with the valve box of Do not use old or used water inlet •...
Installation accordance with the local regulations. Connection must comply with national • max 100 cm regulations. Power cable plug must be within easy • reach after installation. min 50 cm Unplug the product after the min 4cm washing programme is over. The voltage and allowed fuse or •...
Installation Initial use Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections “Important safety instructions” and “Installation”. To prepare the product to do the • dishes, perform first operation in the shortest programme with detergent while the machine is empty.
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance of efficient manner. your dishwasher will increase when water Wipe away any coarse food remnants on softening system is adjusted properly.
Page 16
Installation 1 min. 1 Second 1 Minute Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Preparation If the hardness level of the supply water is Salt reservoir will fill with water above 90 °dF or if you are using well water, when you start the product. then it is recommended to use water Therefore, add the softening purification devices and special filters.
Preparation Since different salt brands in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a while after adding salt into the machine.
Preparation In order to have good washing and drying results, always follow the instructions on the detergent packaging. If you have further questions, we recommend to contact with the producer of the detergent. Do not put solvents into the detergent dispenser. There is risk of explosion! If dishes have been waiting Put the detergent into the detergent...
Preparation Combined tablet detergents 4. Make the appropriate rinse aid settings. Combined tablet detergents exhibit water softening and / or rinse aid effect in Depending on the model, addition to detergent effect. Some types salt indicator and/or rinse aid of these detergents also contain special- indicator must be enabled again purpose washing chemicals such as glass if they were disabled before.
Page 21
Preparation Placing the dishes into the 3. Turn the rinse aid amount adjuster manually to a position between 1 and dishwasher 6 (4). If there are stains on tableware You can use your dishwasher in the items after washing, level must be optimum way with respect to energy increased and if there is a blue trace consumption and washing and drying...
Page 22
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket /42 EN Dishwasher / User’s Manual...
Preparation Cutlery basket Collapsible lower basket tines (depends on model) Cutlery basket is designed to wash your (depends on model) dishes such as knife, fork, spoon, etc. in a Foldable tines (A) located at the lower cleaner manner. basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc.
Preparation Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. Therefore, it will be appropriate to bring the tines in the middle to horizontal or vertical position by holding them from their stems and pushing in the direction of arrow.
Preparation Collapsible upper basket Collapsable lower basket tines wires (2 pieces) (depends on model) (depends on model) Upper basket of the machine is equipped The two piece foldable wires located at the with tines with gradual folding system (A) lower basket of the machine are designed that you can lay down when you need a for an easier placement of large pieces larger space for large dishes.
Preparation Upper basket rack To lower the basket: Press the latch on the loaded basket (depends on model) adjustment mechanism (right and left) to lower the basket (B). Adjusting the height of the upper basket Repeat the same process to lower the (depends on model) other side of the basket.
Preparation Adjusting the height of loaded upper basket (depends on model) Basket adjustment mechanism on the upper basket of the machine is designed to allow you create wider areas in the upper or lover section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions without removing it from the machine.
Preparation Height setting with empty basket (depends on model) In this model, the height setting of the upper basket may be changed using the wheels which are mounted at two different heights. Release the latches on both the right and left tracks of the upper basket by pushing them outwards Pull out the basket out completely.
Operating the product On/Off key 2. Programme Selection / Programme Cancel (3 seconds) key 3. Function keys Tablet detergent function Half Load Function Super Rinse Function Fast+ Function 4. Programme indicator 5. Salt indicator 6. Time Delay Countdown Indicator 7. Start Indicator 8.
Operating the product On/Off key 3. Selected programme will start when When you press On / Off key, indicator you close the door of your machine. lights illuminate on the display for ON position. The lights turn off in OFF position. Programme Selection / Programme Cancel key Press this key until the desired programme...
Operating the product Auxiliary functions Half Load function It is used to operate the machine without Washing programmes of your dishwasher loading it completely. are designed to obtain the best cleaning Load your dishes in the machine as you effect, considering the type of the soiling, like.
Operating the product Warning Sound and Interior Floor illumination Lighting Settings Warning to show that machine is in washing phase (depends on model) Use the submenu settings to change the (depends on the model) "Warning Sound" and "Interior Lighting" Your machine reflects a light to the floor settings for your product.
Operating the product The time delay will start Pay attention not to open the countdown with the closing door of the machine when it is of the door after selecting the running. There may be a rush of Time Delay function. vapour when you open the door of your machine;...
Operating the product Water cut-off warning Rinse Aid indicator ( ) If mains water is cut or water inlet tap is Please check the rinse aid indicator on the turned off the machine cannot take water display to see whether there is adequate in and P2 icon will flash on the programme amount of rinse aid in the dishwasher or indicator.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left Lower impeller to remove the upper impeller (A, B).
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 40
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 41
Troubleshooting machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. •...
Page 42
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 43
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.