Setting Up For Windows 2000/Windows Me/Windows Xp - Sony MDS-PC3 Operating Instructions Manual

Setting up for Windows 2000/Windows Me/Windows XP

Installing the USB driver (Windows 2000)
Installing the USB driver (Windows Me)
14 GB
1
Connect the system stereo component to the computer directly or
via the PC connecting adaptor, and then start up the computer.
"Found New Hardware Wizard" appears.
Quit any applications that are active.
2
Click "Next."
3
Select "Search for a suitable driver for my device (recommended)."
(For the computer system with the CMT-C7NT connected to it,
refer to the operating instructions for that system stereo
component.)
Load the Windows 2000 CD-ROM into the CD-ROM drive of the
computer if the wizard requests it, and then install the drivers.
Installation procedure will be repeated for each of the following
devices.
• USB audio device
• USB composite device
• Generic USB hub
1
Connect the system stereo component to the computer directly or
via the PC connecting adaptor, and then start up the computer.
"Add New Hardware Wizard" appears.
Quit any applications that are active.