LG DL X748 E Series Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Dryer
  5. DL X748 E Series
  6. Owner's manual
LG DL X748 E Series Owner's Manual

LG DL X748 E Series Owner's Manual

Hide thumbs Also See for DL X748 E Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Scan to see the online manual.
OWNER'S MANUAL
DRYER
Read this owner's manual thoroughly before operating the
appliance and keep it handy for reference at all times.
ENGLISH
DL*X748**E
www.lg.com
MFL72045801
Copyright © 2023 LG Electronics Inc. All Rights Reserved.
Rev.00_052423

Advertisement

Table of Contents
loading

Related Manuals for LG DL X748 E Series

Summary of Contents for LG DL X748 E Series

  • Page 1 Scan to see the online manual. OWNER'S MANUAL DRYER Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times. ENGLISH DL*X748**E www.lg.com MFL72045801 Copyright © 2023 LG Electronics Inc. All Rights Reserved. Rev.00_052423...

  • Page 2: Table Of Contents

    34 OPERATION Before Use Loading the Dryer Control Panel Dry Cycles Cycle Modifiers Options and Extra Functions 46 SMART FUNCTIONS LG ThinQ Application Smart Diagnosis Function 50 MAINTENANCE Regular Cleaning 52 TROUBLESHOOTING FAQs Before Calling for Service 58 LIMITED WARRANTY...

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Safety for a Dryer WARNING Fire Hazard Failure to follow safety warnings exactly could result in serious injury, death or property damage. Do not install a booster fan in the exhaust duct. •...

  • Page 4: Warning Statements

    IMPORTANT SAFETY INSTRUCTIONS WARNING Risk of Fire Install the clothes dryer according to the manufacturer’s instructions and local codes. Clothes dryer installation must be performed by a qualified installer. • Do not install a clothes dryer with flexible plastic venting materials. If •...
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS • The appliance must be installed and electrically grounded by qualified service personnel in accordance with local codes. • Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance. • When moving or installing the appliance in a different location, call qualified service personnel for installation and service.
  • Page 6 • Do not grasp the power cord or touch the appliance controls with wet hands. • Do not modify or extend the power cord. • If the appliance has been submerged, contact an LG Electronics customer information center for instructions before resuming use.
  • Page 7 IMPORTANT SAFETY INSTRUCTIONS • Do not put living animals such as pets inside the appliance. • Do not put any part of your body, such as your hands or feet, or metal objects under the appliance. • Do not let your hand get pinched when opening or closing the dryer door. Maintenance •...

  • Page 8: Product Overview

    PRODUCT OVERVIEW PRODUCT OVERVIEW Product Features The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Front View Control panel Lint filters Leveling feet Reversible door Rear View...
  • Page 9 PRODUCT OVERVIEW Water inlet hose connection (for steam models) Exhaust duct oulet Product Specifications Model DL*X748**E Description Steam Dryer Please refer to the rating label for detailed Electrical Requirements information. Min. / Max. Water Pressure 20 - 120 psi (138 - 827 kPa) Dimensions (Width X Depth X Height) 27'' X 29 1/2'' X 44 1/2'' (68.6 cm X 75.0 cm X 113.0 cm) Maximum Depth with Door Open...
  • Page 10 10 PRODUCT OVERVIEW NOTE • For your safety and extended product life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of unauthorized components or parts.

  • Page 11: Installation

    INSTALLATION INSTALLATION Before Installing Installation Overview Please read the following installation instructions first after purchasing this dryer or transporting it to another location. Choose the proper location. Level the appliance. Vent the appliance. Connect the Gas / Electric dryer. • Purchase a UL-listed, 3-wire or 4-wire power cord kit with UL-listed strain relief (electric dryer only) Plug in the power cord.

  • Page 12: Choosing The Proper Location

    12 INSTALLATION Choosing the Proper • For garage installation, you will need to place the appliance at least 18 inches (45.7 cm) above the Location floor. The standard pedestal height is 15 inches (38 cm). You will need 18 inches (45.7 cm) from the garage floor to the bottom of the appliance.
  • Page 13 INSTALLATION Dimensions and Clearances The following clearances are recommended for the appliance. • Additional clearances should be considered for ease of installation and servicing. • Additional clearances should be considered on all sides of the dryer to reduce noise transfer. Installation Spacing for Recessed Area or Closet Installation Description Dimension/Clearance...
  • Page 14 14 INSTALLATION NOTE • There should be at least a little space around the dryer (or any other appliance) to eliminate the transfer of vibration from one appliance to another. If there is enough vibration, it could cause appliances to make noise or come into contact, causing paint damage and further increasing noise.

  • Page 15: Leveling The Appliance

    INSTALLATION Leveling the Appliance NOTE • If you are installing the appliance on the optional WARNING pedestal, you must use the leveling feet on the • Use long-sleeved gloves and safety glasses. pedestal to level the appliance. The appliance leveling feet should be fully retracted. •...
  • Page 16 16 INSTALLATION Remove the four hinge screws. • While supporting the door, remove the four hinge screws, two from each hinge. Set the door aside face down on a protected surface to prevent damage to the door or the work surface. Remove the 4 screws securing the hinges to the door frame.
  • Page 17 INSTALLATION door opens, closes and latches properly in 3) Remove the hinge cover by gently both directions. prying it up with a flat blade screwdriver, being careful not to scratch the paint. Easy load door (on some model) Rotate the hinge cover 180 degrees and install it on the opposite side , where the hinge was attached.
  • Page 18 18 INSTALLATION 6) Install the hinge bracket on the bottom Switch the door strike and the blank cover, left side, first installing one screw behind installing them on the opposite sides from the hinge bracket. which they were removed. • Gently pry out the hole plug on the side of the door cover and install it in the hole on ON THE DOOR : the opposite side.
  • Page 19 INSTALLATION door. The spring should remain attached to Reverse the upper hinge assembly and the lock rod. Set the lock rod aside. hinge filler. • Lift out the upper hinge filler (on the right) and set it aside. • Carefully lift the upper hinge assembly (on the left) out of the outer door frame, using a small flat blade screwdriver if...
  • Page 20 20 INSTALLATION completely into the hinge assembly on 4) Rotate the hinge 180 degrees and snap it the right. Slide the lock rod back and forth back onto the front of the hinge bracket to make sure it is correctly positioned in facing in the opposite direction.
  • Page 21 INSTALLATION compartment and insert the interlock different screws on the bottom edge, in the button on top of it. locations marked below. Reinstall the door cover. • Clean the glass on the door and door cover, if necessary.Make sure the three gray interlock buttons are properly installed and that the top and side lock rods are properly Now, pick up the upper hinge pivot removed...
  • Page 22 22 INSTALLATION Interlock buttons Lower hinge filler Side lock rod Top lock rod Inner lock rods Low hinge bracket Hole plug Lower hinge assembly Upper hinge assembly Upper hinge pivot Upper hinge filler ON THE CABINET : door is now ready to remount on the opposite side of the dryer.

  • Page 23: Installing The Vent Kit

    The appliance is configured to vent to the rear. It can also vent to the bottom or side. NOTE • An adapter kit, part number 383EEL9001B, may be purchased from your LG retailer. This kit contains duct components necessary to change the appliance vent location. Bottom Venting •...

  • Page 24: Stacking The Appliance

    24 INSTALLATION Fit the side bracket to the side of the washer Stacking the Appliance top as shown. Firmly press the adhesive area of the bracket to the washer surface. Secure the side bracket to the washer with a screw on Tools Required the back side of the bracket.
  • Page 25 INSTALLATION Ductwork • To reduce the risk of fire, combustion, or accumulation of combustible gases, DO NOT exhaust dryer air into an enclosed and Maximum length No. of unventilated area, such as an attic, wall, ceiling, of 4-inch Wall Cap Type 90°...

  • Page 26: Connecting Gas Dryers

    26 INSTALLATION • Incorrect or inadequate exhaust systems are not • This dryer must be plugged into a 120-VAC, 60- covered by the dryer warranty. Dryer failures or Hz. grounded outlet protected by a 15-ampere service required because of such exhaust fuse or circuit breaker.

  • Page 27: Connecting Electric Dryers

    INSTALLATION Connecting the Gas Supply Turn on your laundry room’s gas supply. NOTE Check all pipe connections (both internal and • In the Commonwealth of Massachusetts: This external) for gas leaks with a noncorrosive product must be installed by a licensed plumber leak-detection fluid.
  • Page 28 28 INSTALLATION • This appliance is supplied with the neutral wire WARNING grounded. This white ground wire MUST BE MOVED to the neutral terminal when a 4-wire • The wiring and grounding must conform to the cord is to be used, or where grounding through latest edition of the National Electrical Code, the neutral conductor is prohibited.
  • Page 29 INSTALLATION Attach the neutral (white) wire to the center 1’’ (2.5 cm) screw of the terminal block. Attach the power cord ground wire to the green ground screw. 5’’ (12.7 cm) Tighten all screws securely. Ground Wire Remove the terminal block access cover on Reinstall the terminal block access cover.
  • Page 30 30 INSTALLATION UL-Listed 3-Wire Power Cord Reinstall the terminal block access cover. Attach the two hot leads (black and red) of the power cord to the outer terminal block screws. Attach the neutral (white) wire to the center terminal block screw. White Wire moved from Ground Screw Connect the external ground (if required by local codes) to the green ground screw.

  • Page 31: Final Installation Check

    INSTALLATION insulation from each wire. Bend the ends of the three wires into a hook shape. 1’’ (2.5 cm) Remove the terminal block access cover on the upper back of the appliance. Hot lead (black and red) Neutral wire (white) Install UL-listed strain relief into the power cord through-hole.
  • Page 32 32 INSTALLATION manometer, placed on the exhaust duct Press and hold the Temp. and Signal buttons approximately 2 ft. (60.9 cm) from the dryer. Static and then press the Power button. pressure in the exhaust duct should not exceed 0.6 •...
  • Page 33 INSTALLATION However, since the test performed during Excess or crushed Too many elbows or normal operation provides more accurate transition duct exhaust too long information on the condition of the exhaust duct than the installation test, the number of bars displayed during the two tests may not be the same.

  • Page 34: Operation

    34 OPERATION OPERATION Before Use WARNING • To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Operation Overview Adjust Settings Default settings for the selected cycle can now be changed, if desired, using the cycle Clean the Lint Filter modifier and option buttons.

  • Page 35: Loading The Dryer

    OPERATION Woven and Loopknit Materials fingers. Push the lint filter firmly back into place. See Regular Cleaning for more information. • Some woven and loopknit materials may shrink, depending on quality. Permanent Press and Synthetics • Do not overload your dryer. Take out permanent press items as soon as the dryer stops to reduce wrinkles.
  • Page 36 36 OPERATION Tumble Dry Label Directions Do not tumble dry Do not dry (used with do not wash) Heat Setting Label Directions High Medium No Heat / Air...

  • Page 37: Control Panel

    OPERATION Control Panel Control Panel Features Power Button • Press the button to turn the appliance on. Press again to turn the appliance off. NOTE • Pressing the Power button during a cycle will cancel that cycle, and any load settings will be lost. Cycle Selector Knob •...
  • Page 38 38 OPERATION Flow Sense Indicator • The Flow Sense™ duct blockage sensing system detects and alerts you to blockages in the ductwork that reduce exhaust flow from the dryer. Maintaining a clean exhaust system improves operating efficiency and helps minimize service calls, saving you money. Clean Filter Reminder •...

  • Page 39: Dry Cycles

    Use this cycle to minimize wrinkles when drying tablecloths or wrinkle-free clothes. Dry Level Default: Normal Available: All Temperature Default: Medium Available: Medium Steam Cycles LG’s new steam technology injects fabrics with a swirling jet of hot steam to refresh clothes, reduce static, and make ironing easier.
  • Page 40 40 OPERATION Cycle Steam Sanitary Description Use this cycle to reduce bacteria on laundry using TurboSteam. Dry Level Not adjustable Temperature Default: High Available: High Default Time 31 minutes • Comforter, Bedding (Single, 1 each) Fabric Type (Max Amount) • Children's Clothing (3 lbs.) Cycle Steam Fresh Description...
  • Page 41 Downloaded Description This cycle allows you to download a new and specialized drying cycle to your appliance with a smartphone. • Refer to the LG ThinQ smartphone application to see the cycles available for download. Selectable Drying Options Option Cycle †...

  • Page 42: Cycle Modifiers

    42 OPERATION Cycle Modifiers • To turn the sounds on/off, press the Signal button. Alert sounds will still be audible. About Modifier Buttons Each cycle has default settings that are selected automatically. Customize these settings using the cycle modifier buttons. Repeatedly press the button for the desired modifier until the indicator light for the desired setting is lit.

  • Page 43: Options And Extra Functions

    OPERATION Options and Extra Functions • When the filter/duct is clogged, this option may not have optimal results. Your dryer includes several additional cycle • When this function is operating, the drum will options to customize cycles to meet your individual stop to allow steam to stay in the drum.
  • Page 44 44 OPERATION Press the Start/Pause button to start the NOTE cycle. • Steam may not be clearly visible during steam cycles. This is normal. More Time / Less Time • Do not use steam with delicate fabrics such as wool, silk, or easily discolored fabrics. Use these buttons to increase or decrease drying •...
  • Page 45 OPERATION Press and hold the Wrinkle Care button for 3 seconds to activate/deactivate this function. • When the function is deactivated, a chime will sound and the remaining time for the current cycle will reappear on the display. Damp Dry Signal When this option is selected, the appliance signals when the load is approximately 80% dry.

  • Page 46: Smart Functions

    • Remote Control - Control the appliance remotely or check to see how much time is left in the cycle from the LG ThinQ application. NOTE • Once the remote control feature is enabled, you can start a cycle from the LG ThinQ application.
  • Page 47 To check your network frequency, contact your Internet service provider or refer to your wireless router manual. Start a cycle from the LG ThinQ application on • LG ThinQ is not responsible for any network your smartphone. connection problems or any faults, malfunctions, or errors caused by network connection.

  • Page 48: Smart Diagnosis Tm Function

    If this equipment does opensource.lge.com. cause harmful interference to radio or television LG Electronics will also provide open source code reception, which can be determined by turning the to you on CD-ROM for a charge covering the cost...
  • Page 49 SMART FUNCTIONS • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application. Using Audible Diagnosis to Diagnose Issues Follow the instructions below to use the audible diagnosis method.

  • Page 50: Maintenance

    50 MAINTENANCE MAINTENANCE WARNING • Unplug the appliance before cleaning. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They will damage the finish. Regular Cleaning Cleaning the Lint Filter Always clean the lint from the filter after every Cleaning the Exterior cycle.
  • Page 51 MAINTENANCE If the lint filter has become very dirty or clogged with fabric softener, wash the lint filter in warm, soapy water and allow it to dry thoroughly before reinstalling. NOTE • NEVER operate the appliance without the lint filter in place.

  • Page 52: Troubleshooting

    Scan this QR code to quickly access the video search page on the offical LG website. On the lg.com/us home page, click on the Support menu tab to bring up the menu selections. Select Video Tutorials. Type Dryer in the search box on the new page and click the Search button.

  • Page 53: Before Calling For Service

    TROUBLESHOOTING Before Calling for Service The dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the dryer does not function properly or does not function at all, check the following before you call for service.
  • Page 54 54 TROUBLESHOOTING Problem Possible Cause & Solution The Flow Sense ( After clearing the restrictions, the Flow Sense ( ) system requires multiple, indicator remains consecutive cycles to determine that the performance value has improved before the active after clearing Flow Sense ( ) indicator is reset.
  • Page 55 TROUBLESHOOTING Problem Possible Cause & Solution Appliance runs and This is how the Wrinkle Care option works. pauses by itself after • Make sure that the Wrinkle Care option has been set. The option is designed to prevent the drying cycle creases that are formed when the clothes are not unloaded promptly after the drying finishes.
  • Page 56 56 TROUBLESHOOTING Problem Possible Cause & Solution Excess static in Fabric softener is not used or is used incorrectly. clothes after drying. • Use a fabric softener or the Reduce Static option, if available, to reduce static electricity. Be sure to follow the manufacturer’s instructions. Clothes dried too long (overdried).
  • Page 57 During Wi-Fi setup, the app is requesting a password to connect to the product (on certain phones). • Locate the network name which starts with "LG" under Settings > Networks. Note the last part of the network name. - If the network name looks like LGE_Appliance_XX-XX-XX, enter lge12345.

  • Page 58: Limited Warranty

    Should your LG Dryer (“Product”) fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG will, at its option, repair or replace the Product. This limited warranty is valid only to the original retail purchaser of the Product (“You”) and applies only when purchased lawfully and used within the United States including U.S.
  • Page 59 Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG Electronics USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632.
  • Page 60 If you and LG are unable to resolve the dispute within 30 days, either party may proceed to file a claim for arbitration.
  • Page 61 LIMITED WARRANTY www.lg.com/us/support/repair-service/schedule-repair-continued and clicking on “Find My Model & Serial Number”). You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure.
  • Page 62 62 Memo...
  • Page 63 Memo...
  • Page 64 LG Customer Information Center For inquiries or comments, visit www.lg.com or call: U.S.A. 1-800-243-0000 1-888-542-2623 CANADA Register your product Online! www.lg.com...

This manual is also suitable for:

Dlgx7481leDlex7480le

Table of Contents