Basic components
ered in the normal running position, use
an additional support device to secure it
in the tilt position.
EMU35050
Top cowling lock lever (turn type)
To remove the top cowling, turn the front and
side lock levers to release them and lift off
the cowling. Reverse this procedure when
reinstalling the top cowling.
When installing the cowling, align the 3 posi-
tions of the grommets to fit the cowling in the
rubber seal.
23
When installing the cowling, check to be
G
sure it fits properly in the rubber seal.
Be sure to check that the gap between the
G
ZMU05852
top cowling and the bottom cowling is even
all around the cowling. If the top cowling is
loose or the gap is not even, reinstall the
cowling.
EMU26460
Flushing device
This device is used to clean the cooling wa-
ter passages of the motor using a garden
hose and tap water.
NOTE:
For details on usage, see page 51.
ZMU05853
ZMU05934