Sony PCWA-C100 Operating Instructions Manual page 25

Wireless lan pc card for microsoft windows xp home editon, microsoft windows xp professional

Hide thumbs Also See for PCWA-C100:

Table of Contents

The Access Point ID is a six-digit number on the label attached on the

bottom surface of the Access Point. If the Access Point ID displayed

is different from the one on the label, enter the correct ID.

Access Point ID

Factory default Encryption KEY

Note

If an error message appears, click OK then confirm the following and repeat step 2.

• The Access Point is powered.

• The correct Access Point ID is displayed.

• The password is correct.

• The Access Point and the computer are located within a range of approximately

100 m (330 feet).

In Common Parameters, select the Channel Number and

enter the Encryption Key.

Select the channel that the Access Point uses for wireless

communications for Channel Number. You can use Channel 1, 4, 7, or

10.

Enter any 5 characters of the ASCII character set (letters, numbers,

and symbols) for Encryption Key.

The Phone option is not displayed if you are using the PCWA-A200.

(This figure is from the PCWA-A100 screen.)

Table of Contents