Post-Launch Checks - Yamaha WaveRunner FX HO 2016 Owner's/Operator's Manual

Securely install the stern drain plugs by tight-
ening them until they stop.
1 Stern drain plug
2 O-ring
EJU41441
Hood check
Push down on the rear of the hood and make
sure that it is securely closed.
Pre-operation checks
EJU40146

Post-launch checks

Perform the post-launch checks in the pre-
operation checklist while the watercraft is in
the water and the engine is running.
To perform the post-launch checks:
2
(1) Launch the watercraft. (See page 77 for
1
information on launching the watercraft.)
(2) Perform the checks and make sure that
there are no malfunctioning items or oth-
er problems.
EJU40553
Cooling water pilot outlet check
Make sure that water is discharged from the
cooling water pilot outlet while the engine is
running. (See page 31 for information on the
cooling water pilot outlet.)
EJU32715
Multifunction information center check
Make sure that the multifunction information
center operates properly. (See page 40 for in-
73