Programmable functions
Buzzer volume
The buzzer volume can be changed.
You will hear it as it changes.
= quieter
= Factory setting
Keypad tone
With this setting, you can activate/de-
activate a signal tone that will sound
each time a sensor is touched.
The volume of the keypad tone will de-
pend on the setting selected for "
Buzzer volume".
Options
= off
= on (default setting)
In the case of a selection that is not al-
lowed, a negative signal tone sounds.
68
Lock code
The lock code prevents your dryer be-
ing used without your knowledge.
When the code has been activated, you
have to enter a code after switching the
dryer on. Otherwise the dryer cannot be
operated.
Options
= Off (factory default)
= On
If option has been selected, after
switching on you will have to enter the
code before you can operate the dryer.
To use the dryer when the code is ac-
tivated
After the dryer is switched on, will
flash in the time display.
The code is and cannot be altered.
Touch the sensor until a flashes
in the first position.
Confirm with the Start/Stop sensor.
Enter the two other numbers in the
same way.
The dryer is ready for use after has
been entered and confirmed.