Table of Contents
Advertisement
8.3 Starting the operation
You must start each operation.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
Do not use the appliance if there is water on the
▶
cooking compartment floor.
Wipe away any water on the cooking compartment
▶
floor before operation.
Use
to start the operation.
▶
a The settings appear on the display.
8.4 Interrupting the operation
You can interrupt the operation and then continue
again.
To interrupt the operation, press
1.
Press
again to resume operation.
2.
8.5 Setting the operating mode
After you have switched on the appliance, the menu
appears on the display.
To scroll through the various options, press
1.
To select a function, press the corresponding tile.
2.
a Depending on the function, possible adjustment val-
ues or other tiles are available for selection.
3.
If required, press on another tile.
To change the setting values:
4.
Press
or
.
‒
Or select the values directly using the adjustment
‒
bar.
Press
to start the operation.
5.
If the operation is ended:
6.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Note: You can save your settings via the Home Con-
nect and use these again.
→ "Favourites", Page 14
8.6 Setting the type of heating and the
temperature
Press "Types of heating".
1.
Press the type of heating that you want to use.
2.
3.
Set the temperature using
adjustment bar.
If required, you can implement additional settings:
– → "Time-setting options", Page 12
4.
Use
to start the operation.
a The appliance starts heating.
a The adjustment values and how long the appliance
has already been in operation are shown on the dis-
play.
When the food is ready, use
5.
ance off.
Note: The most suitable type of heating for your food
can be found in the type of heating description.
→ "Types of heating", Page 8
.
or .
to switch the ap-
or
or directly via the
to switch the appli-
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
Press
.
1.
Press
.
2.
Press the type of heating that you want to use.
3.
Reset the operation and use
4.
Changing the temperature
Once the operation has started, you can change the
temperature at any time.
Press the temperature.
1.
Change the temperature using
2.
the adjustment bar.
Press "Apply".
3.
8.7 Displaying information
In most cases, you can call up information about the
function that you have just started. The appliance auto-
matically displays certain information, e.g. to ask you to
do/confirm something or to issue a warning.
Press .
1.
a If information is available, this is displayed for a few
seconds.
If there is a lot of content in the tile, scroll using
2.
or
.
If required, close the notification using
3.
8.8 Sabbath-compliant use
If you want to operate your appliance so that it is Sab-
bath-compliant, use the time-setting options and
change the basic setting for the lighting.
Note: If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again. To
operate your appliance so that it is Sabbath-compliant,
do not open the appliance door until after operation.
Change the "Lighting" basic setting to "Always off".
1.
→ "Basic settings", Page 15
This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door.
Set the required operating mode.
2.
→ "Setting the operating mode", Page 11
→ "Setting the type of heating and the temperature",
Page 11
Set the required cooking time depending on the op-
3.
erating mode.
→ "Setting the cooking time", Page 12
→ "Time-setting options", Page 12
Use "End time" to set the time at which the opera-
4.
tion should end.
→ "Setting the end time", Page 12
→ "Time-setting options", Page 12
Place the food in the cooking compartment before
5.
the appliance starts to heat.
Start the operation.
6.
a The display shows the start time. The appliance is in
standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
Basic operation en
to start.
or
or directly via
.
11
Advertisement
Table of Contents
