Table of Contents
Advertisement
Correcting trapezoidal distortion of the projected image (Keystone feature)
Keystone feature
keystone manually.
1 Press the KEYSTONE key on the remote
commander or select V Keystone in the
Installation menu.
2 Use the V/v/B/b the keys to set the value.
The higher the value, the narrower the top
of the projected image. The lower the
value, the narrower the bottom.
Notes
*1: Since the Keystone adjustment is an
electronic correction, the image may be
deteriorated.
*2: VPL-DX131 only.
Automatically adjusts Phase, Pitch and Shift of projected image while a
signal is input from a computer (APA (Auto Pixel Alignment))
Press the APA key on the remote commander. Press again to cancel adjusting during the setting.
You can also set APA in the Screen Menu (page 22). If Smart APA in the Function menu is set
to "On", executes APA automatically when a signal is input (page 24).
18
Projecting an Image
*2
may not work automatically when the screen is tilted. In this case, set
Increase the number
towards plus
Increase the number
towards minus
*1
Advertisement
Table of Contents
