English ROD CUTTER DCS350 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make WALT one of the most reliable partners for professional power tool users. Technical Data DCS350 Voltage UK & Ireland Type No load speed Cut capacity...
English CAUTION: Indicates a potentially Charger DCB105 hazardous situation which, if not avoided, Mains voltage may result in minor or moderate Battery type 10.8/14.4/18 Li-Ion injury. NOTICE: Indicates a practice not Approx. charging time min 25 (1.3 Ah) 30 (1.5 Ah) 40 (2.0 Ah) related to personal injury which, if of battery packs 55 (3.0 Ah) 70 (4.0 Ah) 90 (5.0 Ah)
Page 8
English used for appropriate conditions will reduce The term “power tool” in the warnings refers to personal injuries. your mains-operated (corded) power tool or Prevent unintentional starting. Ensure battery-operated (cordless) power tool. the switch is in the off position before 1) WORK AREA SAFETY connecting to power source and/or Keep work area clean and well lit.
English If damaged, have the power tool repaired where the cutting accessory may contact hidden wiring. Cutting accessory contacting a before use. Many accidents are caused by poorly maintained power tools. “live” wire may make exposed metal parts of the Keep cutting tools sharp and clean.
English DATE CODE POSITION • Do not expose charger to rain or snow. The date code, which also includes the year of • Pull by plug rather than cord when manufacture, is printed into the housing surface that disconnecting charger. This will reduce risk forms the mounting joint between tool and battery.
English WALT chargers require no adjustment and are HOT/COLD PACK DELAY designed to be as easy as possible to operate. When the charger detects a battery that is too hot or too cold, it automatically starts a Hot/Cold Pack Charging Procedure (Fig. 2) Delay, suspending charging until the battery has 1.
English Do not use a battery pack or charger In most instances, shipping a D WALT battery pack that has received a sharp blow, been will be excepted from being classified as a fully dropped, run over or damaged in any regulated Class 9 Hazardous Material.
English Description (Fig. 1) WARNING: Never modify the power Read instruction manual before use. tool or any part of it. Damage or personal injury could result. A. Trigger switch See Technical Data for charging time. B. Reset/lock-off button C. Stationary cutting die D.
English TO REMOVE THE BATTERY PACK FROM THE TOOL Your D WALT charger is double insulated in accordance with EN 60335; therefore 1. Press the release buttons (H) and firmly pull the no earth wire is required. battery pack out of the tool handle. 2.
Page 15
English To turn the tool ON, squeeze the trigger switch (A). CAUTION: If the cutting die cap screws To turn the tool OFF release the trigger. or hex wrench are lost or damaged replace with identical replacement parts. Reset/Lock-Off Button (Fig. 4) Recommended replacement parts for use with your tool are available at extra cost from your local dealer or authorized...
English Hang Hook (Fig. 1) WARNING: To reduce the risk of injury from the threaded rod cutter falling on Lubrication operators or bystanders, make sure it is supported securely when using the Your power tool requires no additional lubrication. hang hook, or resting in a secure and stable location when not in use.
English Should you find one day that your D WALT product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection. Separate collection of used products and packaging allows materials to be recycled and used again.
Page 20
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com en Luxemburg 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT Tel: 70 20 15 10 www.dewalt.dk...