HP Aruba 7024 Startup Manual

Aruba 7024 Controller
Startup Guide
The Aruba 7024 controller is a wireless LAN controller that connects,
controls, and intelligently integrates wireless Access Points (APs) and
Air Monitors (AMs) into a wired LAN system.
Package Contents
Aruba 7024 controller

Power Cable

2 Standard Mounting Brackets

4 M6 x 15 mm Phillips Pan Head Screws

8 M4 x 8 mm Phillips Flat Head Screws

2 M6 x 7 mm Grounding Screws

1 AC Power Cord Retaining Clip

4 Rubber Feet

Aruba 7024 Controller Startup Guide (Printed)

Optional accessories available for use with the Aruba 7024
controller are sold separately. Contact your Aruba sales
representative for details and assistance.
Installation
Software End User License
Agreement
The End User License Agreement (EULA) information for this product
can be found at www.arubanetworks.com/assets/legal/EULA.pdf.
7024 Specifications
Physical
Device Dimensions (HxWxD): 4.37 cm x 44.2 cm x 31.3 cm

Device Weight: 11.303 lbs (5.127 kg)

Electrical
Ethernet

24 x 10/100/1000BASE-T PoE/PoE+ auto-sensing Ethernet RJ-

45 Interfaces
2 x 10GBASE-X (SFP/SFP+)

Power: 580 W Integrated Power Supply

AC Input Voltage: 115 VAC to 230 VAC

AC Input Current: 6.3 A

This device must be professionally
installed and serviced by a trained Aruba-
Certified Mobility Professional (ACMP), or
similar Aruba-certified technician. To
install this device, refer to the Aruba 7024
Controller Installation Guide by scanning
the QR code in this section, or visit
www.support.arubanetworks.com
select Documentation> Hardware
Installation Guides> Controllers>
Aruba 7024 Controller
AC Input Frequency: 47 to 63 Hz

Environmental
Operating

Temperature: 0 °C to +40 °C (+32 °F to +104 °F)

Humidity: 10% to 90% (RH), non-condensing

Storage and Transportation

Temperature: 0 °C to +50 °C (+32 °F to +122 °F)

Humidity: 10% to 95% (RH), non-condensing

Regulatory Model Name
The regulatory model name for the 7024 controller is ARCN7024.
Safety and Regulatory Compliance
Aruba, a Hewlett Packard Enterprise company provides a multi-
language document that contains country-specific restrictions and
additional safety and regulatory information for all Aruba products.
This document can be viewed or downloaded from the following
location: www.arubanetworks.com/safety_addendum
Class 1 Laser Product
This product complies with 21 CFR Chapter 1, Subchapter J, Part
1040.10, and IEC 60825-1: 1993, A1: 1997, A2: 2001, IEC 60825-2:
2004+A1.
For continued compliance with the above laser safety standards, only
approved Class 1 modules from Aruba approved vendors should be
installed in the product.
!
Changes or modifications to this unit not expressly approved
by Aruba, a Hewlett Packard Enterprise company, can void
the user's authority to operate this equipment.
Electromagnetic Interference
FCC Class A Part 15
This device complies with Part 15 of the Federal Communications
Commission (FCC) Rules. Operation is subject to the following two
conditions:
This device may not cause harmful interference.

This device must accept any interference received, including

interference that may cause undesired operation.
then
Industry Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-
003 du Canada.
EU Regulatory Conformance
European Union
This product is CE marked according to the provisions of the
EMC Directive (2014/30/EU) and LVD (2014/35/EU). The
Declaration of Conformity is available for viewing at
www.hpe.com/eu/certificates. Select the document that
corresponds to your device's model number as it is indicated on the
product label.
!
Use of controls or adjustments of performance or
procedures other than those specified in this manual may
result in hazardous radiation exposure.
http://