Table of Contents
Advertisement
Item number
Item name
005
DISPLAY
INFORMATION
SELECT
006
LOCAL FUNCTION
ENABLE
007
TAPE TIMER
DISPLAY
008
MONITORING
SELECTION FOR
VTR-TO-VTR EDIT
Settings
Determines the kind of character information which
is superimposed on output from the VIDEO
OUTPUT 2(SUPER) connector and display on the
monitor when the SUPER in the submenu is set to
ALL/MENU.
T&STA : Time data display information and the
unit's status.
T&UB: Time data display information and the user
bits.
T&CTL: Time data display information and CTL.
T&T: Time data display information and time code
(LTC or VITC) only.
CHARACTER: User-specified text data
If there is an overlap between the setting of this
item and the setting of the CTL/LTC/U-BIT button, it
is automatically avoided. For example, if CTL is
selected by the CTL/TC/U-BIT button and this menu
item setting is T&CTL, then CTL and LTC are
output.
Determines which tape transport control buttons on
the control panel are enabled when this unit is
controlled from external equipment.
DIS: All buttons and switches are disabled.
ST&EJ : Only the STOP button and EJECT button
are enabled.
ENA: All buttons and switches except the
RECORDER button and PLAYER/DMC button are
enabled.
Determines whether to display the CTL count in
12-hour mode or 24-hour mode.
+ –12H : 12-hour mode
24H: 24-hour mode
For recorder-player editing, determines whether the
recorder is forced into E-E mode when the
recorder's PLAYER/DMC button is pressed to view
the player's playback signals on the LCD monitor
on the recorder.
MANU : Do not force the recorder into E-E mode.
AUTO: Force the recorder into E-E mode.
6-3
Setup Menu
Advertisement
Table of Contents
