Table of contents Introduction �������������������������������������������������3 7 Service ��������������������������������������������������14 Dear customer ...............3 Built-in battery care ..........14 About this user manual ..........3 Cleaning .................14 What’s in the box ............3 Update software ............14 Customer service centre ..........3 Troubleshooting ............15 General safety information ��������������� 4 8 Appendix ����������������������������������������������...
Introduction What’s in the box Quick Start Guide PicoPix Micro 2 projector (PPX340) Dear customer Tripod Thank you for purchasing this projector. Transport bag We hope you enjoy this product and the many 3x power plug adapter (EU, UK, US)
The product has built-in battery. Do not product. dissemble and modify. The built-in battery Do not remove the type label from this product, should be replaced by qualified service staff as this will void the warranty. only. Philips · PicoPix Micro 2...
2 Overview Power supply Use only a power adapter which is certified for this product (see Technical data, page 17). Rear view Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product.
Focus adjustment knob Navigate menu options. Adjust image sharpness. • Press and hold for one second to switch the projector on (the AC power adapter must be connected). • Press twice to switch the projector off.. Philips · PicoPix Micro 2...
3 Connect USB-C connection for image projection Notice Connect a USB-C device (e.g. a mobile phone, You need to connect the projector to tablet or laptop) to the projector through USB-C an HDMI or USB-C device, so that the connection. With this connection, images are projection screen can show images.
The capacity of the built-in battery base of the power adapter. diminishes with time. If the projector functions only with external power supply, the built-in battery is defective. Contact an authorised service centre to replace the built-in battery. Philips · PicoPix Micro 2...
Prepare the remote control Set up the language Press on the remote control to access CAUTION! the settings menu, then navigate to select OSD Language, and press OK. The improper use of batteries can lead to overheating, explosion, risk of fire and Press the Navigation button to select a injury.
Follow the guidelines below for different projector placement. To adjust projection to the correct position, press on remote control to access the settings menu, then navigate to select Projection Mode - Rotate Ceiling, then press OK. Philips · PicoPix Micro 2...
5 Other features Rear table Place the projector on a table behind the projection screen. A special rear projection screen is required. Listen through external speakers or headphones Connect external speakers or headphones to the projector. With this connection, audio from the projector is played through the external speakers or headphones.
To activate easy link function on this projector, press on remote control to access the settings menu, then navigate to select HDMI CEC - On. You need to select a correct input source, so that the projection screen can show images. Philips · PicoPix Micro 2...
Picture settings • Brightness: Select a screen brightness mode. • Display Duration: Select a timer to You can access the following picture settings. automatically turn the screen off when the • Keystone Correction: Select an option to projector is idle. correct keystone or distorted images to be rectangular or square.
Check the latest software version on www. projector for at least five hours before using it. philips.com/support. Find your product DANGER! (model number: PPX340, and locate ‘Software and drivers’. Risk of explosion with incorrect type of batteries! Download the zipped software file, then...
Troubleshooting Power cycling If a problem occurs that cannot be corrected with the instructions in this user manual, follow the steps given here. Turn the projector off. Wait at least ten seconds. Turn the projector on again by holding down for 1 second.
Page 16
What to do if the projector does not work • Check that the HDMI cable is plugged in correctly. when connecting to a notebook PC? • Make sure that the notebook PC has been switched to projector display. Philips · PicoPix Micro 2...
This device complies with Industry Canada CAN The Declaration of Compliance can be ICES-3 (B)/NMB-3(B) consulted on the site www.philips.com. RSS-Gen & RSS-247 statement: This device FCC statement complies with Industry Canada RSS standard(s). Operation is subject to the following two 15�19 Labeling requirements�...
Page 19
Screeneo Innovation SA shall not be liable for any damages or problems arising from the use of any options or any consumable materials other than those designated as original Screeneo Innovation SA/PHILIPS products or Screeneo Innovation SA/PHILIPS approved products. Screeneo Innovation SA shall not be held liable...
Page 20
Screeneo Innovation SA Route de Lully 5c - 1131 Tolochenaz - Switzerland Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. Screeneo Innovation SA is the warrantor in relation to the product with which this booklet was packaged.