DeWalt DXPW3400PR Instruction Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Pressure Washer
  5. DXPW3400PR
  6. Instruction manual

DeWalt DXPW3400PR Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

InstructIon ManuaL
GuIDe D'utILIsatIon
ManuaL De InstruccIones
DP3400
Pressure Washer
Laveuse à pression
Lavadora a presión
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D
WALT • www.dewalt.com
e
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. aDVertencIa: LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO.

Advertisement

Table of Contents
loading

Related Manuals for DeWalt DXPW3400PR

Summary of Contents for DeWalt DXPW3400PR

  • Page 1 If you have questions or comments, contact us. Pour toute question ou tout commentaire, nous contacter. Si tiene dudas o comentarios, contáctenos. 1-800-4-D WALT • www.dewalt.com InstructIon ManuaL INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA GuIDe D'utILIsatIon DE GARANTÍA. aDVertencIa: LÉASE ESTE INSTRUCTIVO ANTES ManuaL De InstruccIones DE USAR EL PRODUCTO.

  • Page 2: Pump Specifications

    FIG. 1 DP3400 Pressure WasHer A. Handle assemble I. Engine dipstick/oil plug B. Frame J. High-pressure pump C. High-pressure hose K. Engine D. Spray gun L. Choke control E. Quick-connect M. Starter grip spray wand N. Fuel valve lever F. Panel assembly O.

  • Page 3: Definitions: Safety Guidelines

    3. Know how to stop the product and bleed pressures quickly. Be Definitions: Safety Guidelines thoroughly familiar with the controls. 4. Stay alert–watch what you are doing. The definitions below describe the level of severity 5. Do not operate the product when fatigued or under the influence for each signal word.
  • Page 4 • Muffler exhaust heat can • Always keep pressure washer damage painted surfaces, a minimum of 4' (1. m) away melt any material sensitive from surfaces (such as houses, automobiles or DANGeR: RISk of exPloSIoN oR fIRe to heat (such as siding, live plants) that could be plastic, rubber, vinyl or the WHat can HaPPen...
  • Page 5 • Direct spray away from self DANGeR: RISk to BReAthING (ASPhyxIAtIoN) coNtINueD and others. • Some cleaning fluids • Use only cleaning fluids • Make sure hose and fittings contain substances which specifically recommended are tightened and in good could cause injury to skin, for high-pressure washers.
  • Page 6 DANGeR: RISk of uNSAfe oPeRAtIoN DANGeR: RISk of INjuRy fRom SPRAy WHat can HaPPen HoW to PreVent It WHat can HaPPen HoW to PreVent It • Unsafe operation of your • Do not use chlorine • High-velocity fluid spray • Always wear ANSI-approved pressure washer could lead bleach or any other can cause objects to break,...
  • Page 7 • If proper starting procedure • If engine does not start after is not followed, engine can two pulls, squeeze trigger kickback causing serious of gun to relieve pump DANGeR: RISk of INjuRy oR PRoPeRty DAmAGe hand and arm injury. pressure.
  • Page 8 WARNING: RISk of BuRStING WARNING: RISk of hot SuRfAceS WHat can HaPPen HoW to PreVent It WHat can HaPPen HoW to PreVent It • Contact with hot surfaces, • During operation, touch • Over inflation of tires could • Use a tire pressure gauge such as engines exhaust only the control surfaces result in serious injury and...

  • Page 9: Installation

    . Attach high-pressure hose (C) to spray gun (D). Make sure it is secure. 3. Connect wand (E) to spray gun. Make sure connection is WARNING: RISk of electRIcAl Shock secure. WHat can HaPPen HoW to PreVent It • Spray directed at electrical •...

  • Page 10: Operation

    Spray Wand nozzles (Fig. 1) 7. Remove dipstick/oil plug (H) from plastic bag and install into pump, tighten securely. The nozzles for the spray wand are stored in the nozzle holder (G) on note: The shipping plug must be removed and the panel assembly (F).
  • Page 11 to aPPLY cHeMIcaLs anD soLVents * cA utIoN: The high-pressure spray from your pressure washer 1. Press chemical hose (S) onto barbed is capable of causing damage to surfaces such as wood, glass, fitting located near high pressure hose automobile paint, auto striping and trim, delicate objects such connection of pump as shown.
  • Page 12 . Check engine oil level. Refer to the engine instruction manual for WARNING: Risk of fire, asphyxiation and burning. NEvER fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank. correct procedure. • NEvER fill fuel tank completely. Fill tank to 1/2" (12.7 mm) below 3.

  • Page 13: Shutting Down

    1. Release trigger to stop water flow. a routine maintenance schedule should be prepared and followed. If the pressure washer is used in unusual conditions, such as high DANGeR: Risk of injury from spray. Engage the temperatures or dusty conditions, more frequent maintenance trigger lock (W) when gun is not in use to prevent checks will be required.
  • Page 14 6. Replace pump dipstick/oil plug and tighten securely. 3. Reinsert filter into water inlet of pump. Cone side faces out. nozzle cleaning note: Do not operate pressure washer without If the nozzle becomes clogged with foreign materials, such as dirt, filter properly installed.

  • Page 15: Pressure Washer

    3. Store chemical hose so it is protected from damage. warranty coverage and warranty repair information, visit 4. If space is needed, handles may be removed and attached as www.dewalt.com or call 1-800-4-D WALT (1-800-433-958). This shown. warranty does not apply to accessories or damage caused where cAutIoN: Risk of personal injury.
  • Page 16 LatIn aMerIca: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country spe- cific warranty information contained either in the packaging, call the local company or see website for warranty information. Free WarnInG LaBeL rePLaceMent: If your warning labels become illegible or are missing, call 1-800-4-D WALT for a free...
  • Page 17 Glossary Bypass mode: Allows water to re-circulate within pump when the gun trigger is not pulled. chemical hose: Feeds cleaning agents into the pump to mix with the water. Refer to chemicals and cleaning solvents. chemical injection system: Mixes cleaners or cleaning solvents with water to improve cleaning effectiveness.

  • Page 18: Troubleshooting Guide

    Troubleshooting Guide This section provides a list of the more frequently encountered malfunctions, their causes and corrective actions. The operator or maintenance personnel can perform some corrective actions, and others may require the assistance of a qualified D WALT technician or your dealer. Problem code Engine will not start ......................1, , 3, 4, 5, 6, 7, 8...

  • Page 19: Troubleshooting Codes

    Troubleshooting codes coDe PossIBLe cause PossIBLe soLutIon No fuel. Add fuel. Low oil. Add required amount of oil. Pressure builds up after two pulls on the recoil starter or after Squeeze gun trigger to relieve pressure. initial use. Choke lever in the NO CHOKE position. Move choke to the CHOKE position.
  • Page 20 (Troubleshooting codes cont.) coDe PossIBLe cause PossIBLe soLutIon See spray Wand nozzles under Operation. Spray wand not in low pressure. Chemical filter clogged. Clean filter. Chemical screen not in cleaning solution. Make sure end of chemical hose is fully submerged into cleaning solution.

This manual is also suitable for:

Dp3400

Table of Contents