Factory default settings
If you have altered any settings, you
can reset them back to the factory de-
fault settings.
Open the door.
Turn the dishwasher off with the
button, if it is turned on.
Press the button in and, while
holding it in, turn the dishwasher on
using the button.
Keep the button pressed in for at
least 4 seconds until the indicator
light comes on.
If this does not happen, start the proce-
dure from the beginning again.
Program options
Press the program selector 19 times.
The top left program indicator light will
emit 1 long flash and 9 short flashes at
intervals.
The flashing sequence in the time dis-
play indicates whether the setting devi-
ates from the factory default:
- : all values are factory default set-
tings.
- : at least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the button.
The setting is now saved.
Turn the dishwasher off with the
button.
49