Table of Contents
Advertisement
Canon
Q. Counters
This section describes the soft counters and MEAP counters.
1.
Soft Counters
The imageRUNNER ADVANCE DX C568/C478 Series machines use
soft counters to track their functional copy use. The control panel
displays up to six (6) counters on the Counter Status Check screen
(when the Counter Check key on the control panel is pressed). By
default, the imageRUNNER ADVANCE DX C568/C478 Series machines
display 4 out of 8 counters on the Counter Status Check screen.
The table below indicates the default counter configurations of the
imageRUNNER ADVANCE DX C568/C478 Series machines displayed
on the Counter Status Check screen. For more information on the soft
counter configurations, see the imageRUNNER ADVANCE DX
C568/C478 Series Service Manual. Specifically, refer to the Service
Mode section of the Service Manual that covers the setting under
COPIER > OPTION > USER.
Table 21 – Soft Counter Configuration
Counter
The displayed counters can be changed, enabled, or disabled in the
Service Mode, except for Counter 1. Counter 1 cannot be changed
under any circumstances.
Since the imageRUNNER ADVANCE DX C568/C478 Series does not
support 11" x 17" paper, a double-click charge scheme cannot be used.
35 Refers to small size paper (when the paper length is 14" (364 mm) or shorter in the paper feed direction).
imageRUNNER ADVANCE DX C568iF/iFZ C478iF/iFZ Service Guide
Revision 3
imageRUNNER ADVANCE DX C568iF/iFZ C478iF/iFZ Service Guide
1
101: Total 1
2
108: Total (Black 1)
3
230: Copy (Full Color + Single Color/Small
4
322: Print (Full Color + Single Color/Small
5
Not displayed
6
Not displayed
7
Not displayed
8
Not displayed
Description
35
35
Default
Default Switch
Display
On
Fixed
On
)
On
Can be changed
)
On
via the Service
Off
Mode setting to
any available
Off
counter.
Off
Off
September 2022
Page 63
Advertisement
Table of Contents
