1. Disassembly Procedures:
S1
Turn off power..
Unplug external cables(power cable and video
S2
cable) from the monitor.
Remove stand from the product.(Press the stand
S3
release button, lift the stand up and away from the
monitor)
Use a Philips-head screwdriver to remove 4pcs
S4
screws for unlocking mechanisms. Remove DP cap.
(No.1~4 screw size=M4x11; Torque=11
1kgfxcm)
±
2
3
1
4
Wedge your fingers between rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
S5
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
2
Lift the rear cover up and tear off 1pc aluminum foil,
then disconnect the joystick key cable from the
S6
connector of the main board, and then remove the
rear cover and put it aside for later disassembling.
Use a Philips-head screwdriver to remove 2pcs screw
for unlocking the USB board, then tear off all the tapes
S7
and release the joystick cable.
(No.1~2 screw size=M2x3.3, Torque=1
1
DELL P3424WEB
1
2
3
0.2kgfxcm)
±
2
1