Related Manuals for Siemens SN23HI60CY
Summary of Contents for Siemens SN23HI60CY
- Page 1 Dishwasher SN23HI60CY User manual Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Folding prongs ....... 21 General information...... 4 Basket heights........ 22 Intended use........ 4 Before using for the first time .. 22 Restriction on user group.... 4 Performing the initial configura- Safe installation ........ 5 tion.......... 22 Safe use ........... 6 Damaged appliance ...... 8 Water softening system.... - Page 3 Basic settings........ 33 Technical specifications.... 55 Overview of basic settings ..... 33 Information regarding Free and Open Source Software .... 56 Changing basic settings.... 34 Home Connect ...... 34 Home Connect quick start ..... 35 Home Connect settings.... 35 Remote Start ....... 35 Remote Diagnostics ...... 36 Software update ...... 36 Data protection....... 36 Declaration of Conformity.... 36...
-
Page 4: Safety
en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information You can find general information for this instruction manual here. ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡... -
Page 5: Safe Installation
Safety en Keep children under the age of 8 years away from the appliance and power cable. Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. ▶ When installing and connecting the appliance, follow the in- structions in the manual and installation instructions. -
Page 6: Safe Use
en Safety WARNING ‒ Risk of fire! It is dangerous to use an extended power cord and non-ap- proved adapters. ▶ Do not use extension cables or multiple socket strips. ▶ If the power cord is too short, contact Customer Service. ▶ Only use adapters approved by the manufacturer. WARNING ‒ Risk of burns! If the appliance is not installed properly, this may result in burns. - Page 7 Safety en WARNING ‒ Risk of injury! ¡ Leaving the appliance door open may result in injury. ▶ Only open the appliance door to load or unload tableware in order to prevent accidents, e.g. through tripping. ▶ Do not sit or stand on the appliance door when open. ¡...
-
Page 8: Damaged Appliance
en Safety Damaged appliance Follow the safety instructions if the appliance is damaged. WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is danger- ous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured sur- face. - Page 9 Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
-
Page 10: Preventing Material Damage
en Preventing material damage ¡ Modified or damaged water hoses Preventing material damage Preventing material dam- may result in material damage and damage to the appliance. Never kink, crush, modify or cut ▶ through water hoses. Follow these instructions to prevent Preventing material damage Only use the water hoses sup- material damage to your appliance,... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en ¡ Unsuitable cleaning agents may Saving energy damage the appliance. If you follow these instructions, your Do not use a steam cleaner. ▶ appliance will use less electricity and So as not to scratch the finish ▶... -
Page 12: Installation And Connection
en Installation and connection installing it under a continuous work- Installation and connection Installation and connec- top that is securely connected to ad- jacent cabinets. tion "Follow the safety instructions." To ensure proper operation, connect Installation and connection → Page 4 the appliance to the power and water "Follow the instructions for elec- supply correctly. -
Page 13: Drinking Water Connection
Installation and connection en Check that the mains plug is inser- Drinking water connection ted properly. Connect your appliance to a drinking water connection. Installing the drinking water connection Note: If you are replacing the appli- ance, you must use a new water sup- ply hose. -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarise yourself with the parts of your appliance. Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number"... -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 26 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 20 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 22 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance 3 4 5 6 "Switching on the appliance" → Page 30 ON/OFF button and reset button "Switching off the appliance" → Page 31 "Terminating the programme" → Page 31 "Programmes" → Page 17 Programme buttons Display The display shows information about the remain- ing running time or the basic settings.
-
Page 17: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- ted. The running time will change if Programmes grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 18: Information For Test Institutes
en Programmes Programme Programme sequence Additional func- tions → "Additional Tableware: Time-optimised: ¡ Cleaning mixed table- ¡ Cleaning 65 °C functions", Speed 65° ware and cutlery. Page 19 ¡ Intermediate rinse Level of soiling: ¡ Final rinse 69 °C ¡ Removing common ¡ Drying household food remnants lightly dried-on. -
Page 19: Additional Functions
Additional functions en a The selected programme and the Additional func- additional function will flash. tion flashes. ¡ Switch on with mixed a The programme and the additional loads containing table- function are saved. IntensiveZone ware with different soil- Tip: To reset the programme, either ing levels, e.g. -
Page 20: Bottom Basket
en Features You can adjust the height of the top Bottom basket basket to make room for larger items Arrange pans and plates in the bot- of tableware. tom basket. Adjusting top basket with side levers To wash large items of tableware in the baskets, adjust the shelf position of the top basket. -
Page 21: Etagere
Features en Arrange cutlery with the points and Folding down prongs sharp edges downwards. If you do not need the prongs, fold them down. Etagere Push the lever forwards and fold Use the cutlery shelf and space un- down the prongs ... -
Page 22: Basket Heights
en Before using for the first time Basket heights Set the baskets at the right height. Appliance height 81.5 cm with cutlery drawer Setting Top basket Bottom basket 1 max. ø 16 cm 31 cm 2 max. ø 18.5 cm 27.5 cm 3 max. -
Page 23: Overview Of Water Hardness Set- Tings
Water softening system en Water hardness °E Hardness range mmol/l Setting value 9 - 10 Soft 1.2 - 1.4 11 - 12 Medium 1.5 - 1.8 13 - 15 Medium 1.9 - 2.1 16 - 20 Medium 2.2 - 2.9 21 - 26 Hard 3.0 - 3.7 27 - 38... -
Page 24: Switching Off The Water Softening System
en Rinse aid system Do not use table salt. ¡ The water hardness is 0 - 8 °E. You do not need to use special Add the special salt to the dis- salt. penser. Press . To open the basic settings, press for 3 seconds. -
Page 25: Setting The Amount Of Rinse Aid
Rinse aid system en Press repeatedly until the display shows the value set at the factory r05. Press repeatedly until the right amount of rinse aid has been set. – A low setting adds less rinse aid during the wash cycle and re- duces streaking on tableware. -
Page 26: Detergent
en Detergent Detergent Description Detergent Detergent Liquid detergent Liquid detergent works faster and is recommen- Find out which detergents are suit- Detergent ded for shorter "Pro- able for your appliance. grammes" → Page 17 Suitable detergents without PreRinse. Sometimes liquid deter- Only use detergents that are suitable gent may leak out despite for dishwashers. -
Page 27: Unsuitable Detergents
Detergent en depending on the combination (4in1, ¡ According to manufacturers, com- 5in1, ...), additional components such bined detergents with salt replace- as glass protection or stainless steel ment substances can only be used cleaner. up to a certain water hardness, According to manufacturers, com- usually 26 °E, without adding spe- bined detergents generally only func- cial salt. -
Page 28: Tableware
en Tableware If you are using powder or liquid Tableware Tableware detergent, follow the manufac- turer's instructions and quantities Only clean tableware that is suitable Tableware for dosage in the detergent dis- for dishwashers. penser. 20 ml – 25 ml detergent is suffi- Note: Decorated glassware and parts cient for normal soiling. -
Page 29: Arrange Tableware
Tableware en ¡ For better washing and drying res- Cause Recommendation ults, position items with curves or Highly caustic alkaline If you are using highly recesses at an angle so the water or highly acidic clean- caustic alkaline or can run off. ing agents, in particu- highly acidic cleaning lar commercial or in-... -
Page 30: Removing Tableware
en Basic operation The Eco 50° programme is an es- pecially environmentally friendly programme and ideal for normally soiled tableware. It is the most effi- cient programme for the combina- tion of energy/water consumption for this type of tableware and evid- ences conformity with the EU Eco- design Directive. -
Page 31: Setting Timer Programming
Basic operation en a The button lock is activated and Setting timer programming will be automatically deactivated at You can delay the start of the pro- the end of the programme. a When the appliance is operated, gramme by up to 24 hours. flashes on the display. - Page 32 en Basic operation Tip: If you press during the wash cycle, the programme currently run- ning will be interrupted. When you switch the appliance back on, the programme continues automatically.
-
Page 33: Basic Settings
Basic settings en Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07 Set the water softening system to your water hardness. -
Page 34: Changing Basic Settings
en Home Connect Basic setting Display text Selection Description Remote Start rc0 - rc2 Activate or deactivate → "Remote Start ", Page 35. The following settings are possible: ¡ With the setting "rc0", the func- tion is permanently deactivated. ¡ With the setting "rc1", the func- tion can be selected via the button. -
Page 35: Home Connect Quick Start
Home Connect en Tips ¡ Please consult the documents sup- plied by Home Connect. ¡ Please also follow the instructions in the Home Connect app. Note: Please note the safety precau- tions in this instruction manual and make sure that they are also ob- Follow the instructions in the served when operating the appliance Home Connect app. -
Page 36: Remote Diagnostics
A detailed RED Declaration of Con- protection. formity can be found online at The first time your appliance is www.siemens-home.bsh-group.com registered on a home network among the additional documents on connected to the Internet, your the product page for your appliance. -
Page 37: Cleaning And Servicing
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service. - Page 38 en Cleaning and servicing Phase Removal of Detergent Placement Grease and limescale Liquid machine care product Appliance interior, e.g. bottle or machine descaler in hung in the cutlery basket or powder form. powder in the interior. Food remnants and deposits Machine cleaner Detergent dispenser To ensure optimum cleaning perform- ¡...
-
Page 39: Filter System
Cleaning and servicing en Filter system The filter system removes coarse soiling from the dishwashing cycle. Press the locking catches gether and lift the coarse filter out . Micro filter Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may block the filters. -
Page 40: Cleaning Spray Arms
en Cleaning and servicing Cleaning spray arms Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove . Pull up the lower spray arm to re- move. -
Page 41: Troubleshooting
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 42 en Troubleshooting Fault Cause troubleshooting E:32-00 will light up altern- Remove the filter from the supply ately or indicator for water hose supply lights up. Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 43: Washing Results
Troubleshooting en Fault Cause troubleshooting A different error code ap- A technical fault is present. Press . pears in the display window. Unplug the appliance or switch off the fuse. E:01-00 to E:90-10 Wait at least 2 minutes. Insert the mains plug of the appli- ance in a socket or switch on the fuse. - Page 44 en Troubleshooting Fault Cause troubleshooting Tableware is not dry. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- Activate Extra Dry. ▶ prove drying performance. Tableware removed too Wait until the programme ends. early or drying process not Only remove tableware 30 minutes yet ended.
- Page 45 Troubleshooting en Fault Cause troubleshooting Remnants of food on table- Washing programme selec- Select a more intensive washing ▶ ware. ted too weak. programme. → "Programmes", Page 17 Tableware has been pre- Only remove large remnants of food ▶ cleaned too intensely. The and do not prerinse tableware.
- Page 46 en Troubleshooting Fault Cause troubleshooting Water marks on plastic Due to laws of physics Select a more intensive pro- ▶ parts. droplet formation on plastic gramme. → "Programmes", Page 17 surfaces is unavoidable. After drying water marks are Position tableware at an angle. ▶...
- Page 47 Troubleshooting en Fault Cause troubleshooting Tea residue or lipstick marks Too little detergent is being Use a suitable "Detergent " ▶ → Page 26 and follow the manufac- on tableware. used or is unsuitable. turer's instructions for the amount to be used. Tableware has been pre- Only remove large remnants of food ▶...
- Page 48 en Troubleshooting Fault Cause troubleshooting Plastic parts are discol- Tableware has been pre- Only remove large remnants of food ▶ oured. cleaned too intensely. The and do not prerinse tableware. sensors chose a weaker pro- gramme. Stubborn soiling cannot be entirely removed. Removable streaks are Amount of rinse aid to be Set the rinse aid system to a lower...
-
Page 49: Home Connect Problem
Troubleshooting en Fault Cause troubleshooting Rust spots on cutlery. Cutlery is not sufficiently Use rust-resistant tableware. ▶ rust-resistant. Knife blades are often more severely af- fected. Cutlery may also rust if Do not wash rusting items. ▶ washed together with rust- ing items. -
Page 50: Information On Display Panel
en Troubleshooting Information on display panel Fault Cause troubleshooting Add "Special salt" → Page 23. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶... -
Page 51: Mechanical Damage
Troubleshooting en Fault Cause troubleshooting Appliance does not start. Mains cable is not inserted. Check whether the socket works. Check whether the mains cable is properly inserted in the socket and on the rear of the appliance. Appliance door is not closed Close the appliance door. -
Page 52: Noise
en Troubleshooting Noise Fault Cause troubleshooting Filling valves making knock- Caused by the domestic in- Can only be remedied in the do- ▶ ing noises. stallation. No appliance fault mestic installation. present. Does not affect functioning of the appliance. Knocking or rattling noise. Spray arm is striking table- Arrange tableware so that the spray ▶... -
Page 53: Clean Wastewater Pump
Transportation, storage and disposal en Clean wastewater pump Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. WARNING Risk of injury! Sharp and pointed objects or frag- ments of glass may block the waste a The pump cover clicks into posi-... -
Page 54: Protect Appliance From Frost
en Customer Service Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 55: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
Technical specifications en We will always find an appropriate AQUA-STOP guarantee solution and try to avoid unnecessary In addition to warranty claims against visits being made by a Customer Ser- the seller under the purchase agree- vice technician. ment and in addition to our manufac- With any warranty claims, we will turer's warranty, we offer compensa- make sure that your appliance is re-... - Page 56 en Technical specifications documents). Alternatively, you can Power consumption Off mode/standby send a request to oss- mode: 0.50 W request@bshg.com or to BSH Haus- Left-on mode: 0.50 W geräte GmbH GmbH, Carl-Wery-Str. Networked standby: 34, D-81739 München, Germany. 2.00 W The source code will be made avail- Time in left-on mode: able to you on request.
- Page 60 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG *9001511719* 9001511719 (000630) 650 V1...