Table of Contents
Advertisement
Programme
Food
P08
Frozen bake, up to 3 cm deep
Cooking food using the combi cooking
programme
Take the food out of its packaging.
1.
Weigh the food.
2.
You require the weight in order to set the pro-
gramme.
Basic settings
11 Basic settings
You can configure the basic settings for your appliance to meet your needs.
Basic settings
11.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Setting
Selection Meaning
Button tone
¡
¡
Demo mode
1
Factory setting (may vary according to model)
11.2 Changing basic settings
Requirement: The appliance is switched off.
Press and hold
1.
a The display shows the first basic setting.
Press
.
2.
a The current value flashes on the display.
Use the settings area to set the required value.
3.
4.
To accept the basic setting, press
To exit the basic setting, press
5.
Use the settings area to switch to the basic setting
6.
.
To edit the basic setting, press
7.
a The selected setting lights up on the display.
Use the settings area to set the required value.
8.
To accept the basic setting, press
9.
To exit the basic setting, press
10.
To exit the basic settings menu, press
11.
Tip: The setting can be changed at any time.
11.3 Changing the signal duration
When your appliance is switched off, you hear an aud-
ible signal. You can change the duration of the signal.
1
Switch the button tone on and off.
Note: The button tone remains active for
Activate or deactivate demo mode.
Note: The appliance is switched off. You can use the buttons and the display; the but-
tons do not work. Demo mode is mainly useful for dealers.
and
for a few seconds.
.
.
.
.
.
again.
Cookware
Open
3.
Place the food in microwave-safe, heat-resistant
cookware that is not too big.
Set the programme. → Page 11
4.
Once the programme has finished, leave the food to
5.
rest for another 5–10 minutes to allow the temperat-
ure to even out.
and
Press and hold
▶
a The signal duration switches between short and
long.
a The appliance applies the signal duration and dis-
plays the time.
11.4 Setting the time
Note: After connecting the appliance to the power or
following a power cut, a signal sounds and several
zeros are shown on the display. It may take a few
seconds until a signal sounds and you can set the
time.
Requirements
¡ An audible signal sounds.
¡ 12:00 is shown on the display.
¡ The indicator light lights up via
Set the time via the settings area.
1.
Press
.
2.
11.5 Hiding the clock
To reduce the standby consumption of your appliance,
you can hide the clock.
Press
.
1.
Press
.
2.
To view the clock, press
Basic settings en
Weight range in kg
0.40–0.90
.
for approx. six seconds.
.
again.
13
Advertisement
Table of Contents
