Changing The Activated "Ready In" Time; Adding Laundry; Cancelling The Programme; Unloading The Laundry - Bosch WTR87T90IL User Manual

12.5 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 32
¡ The "Ready in" time is set and ac-
tivated.
→ "Buttons", Page 22
Press Start/Reload .
1.
The activated "Ready in" time is
paused.
Press Finish in repeatedly until
2.
the display indicates the desired
"Ready in" time.
Press Start/Reload .
3.
The changed "Ready in" time is ac-
tivated.
12.6 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
Press Start/Reload .
1.
The cooling process starts auto-
matically after approx. 30 seconds
and cools down the laundry while
the drum is rotating. If you want to
avoid or cancel the cooling pro-
cess, open the door.
→ "Display", Page 20
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press Start/Reload .
5.
12.7 Cancelling the pro-
gramme
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
Press Start/Reload .
1.
The cooling process starts auto-
matically after approx. 30 seconds
and cools down the laundry while
the drum is rotating. If you want to
avoid or cancel the cooling pro-
cess, open the door.
→ "Display", Page 20
Open the appliance door.
2.
Remove the laundry → Page 33.
3.
12.8 Unloading the laundry
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
Open the appliance door.
1.
Remove the laundry.
2.
12.9 Switching off the appli-
ance
Turn the programme selector to
▶
Off.
Basic operation en
33