GE 33625 Instruction Manual page 9

Although the audio receiver can only play music from one device at a time, it is capable of being
paired to up to 8 devices.
After connecting, simply play music on your device as you normally would but enjoy it wirelessly
from your stereo system.
Note: the GE-branded audio receiver is a Bluetooth Class 2 device with a ~33 ft. line of sight
range. However, actual range may vary based on obstructions and conditions in the room.
How to disconnect manually:
When you need to disconnect your device, you can press and hold
the button on top of the audio receiver. This will start the receiver
looking for a new connection.
Reconnecting your device:
If you move out of range or turn off the Bluetooth feature on your
device, the audio receiver will disconnect from your device. To reconnect, simply open the Bluetooth
settings and choose "GE Audio Receiver." You will not need to input the PIN again.
Adding a new phone or tablet:
If you want to switch from one device to another, please follow these steps:
1. End the existing Bluetooth connection with connected device.
2. The GE-branded audio receiver can now be connected with another device that is already con-
nected, or follow the section "Pairing your Audio Receiver" to connect a new device.
When out of range or the signal is lost:
When the connected device is away from receiver or the signal obstructed, the LED light will turn off.
To avoid a lost connection:
1. Move your device back into range (within 33ft.), and make sure there's a clear line of sight with no
obstructions.
2. Within 1 hour, the connection will automatically be re-established and the LED will turn on
Note: If the connection has been lost for more than 1 hour, you will need to reconnect the device
again.
7