Pioneer RC310TG Manual page 9

Operating Instructions
Using the Timer - TIMER ON
The TIMER feature allows you to set a time delay for
the system to turn itself on or off.
To set a time delay for the system to turn itself on in X
amount of hours:
1. Begin by pressing the
system is powered off. The
display flashing. The default setting is 6.0 hours.
2. Use the Temp
needed time delay in 30 minute increments.
3. Press the button a second time to confirm.
4. Press the button to select the desired
operating mode that the unit should start up in.
5. Set the desired fan speed that the unit should
start up in by pressing the
6. Use the and
operation temperature. The unit is now primed.
Using the Timer - TIMER OFF
The TIMER OFF feature allows the appliance to
turn itself off after X amount of hours have passed.
The symbol will appear. To set a time delay for
the system to turn itself off in X amount of hours:
1. Confirm that the appliance is on and running.
2. Press the button to enter the prompt for
switching off the system. Use the
buttons to configure the time delay setting.
3. Press the button again to confirm. It can
also be pressed once more to cancel the setting.
button while the
symbol will
and buttons to set the
button.
buttons to set the desired
and
then
NOTE Regarding Timers
• Press the
at any time in Timer Off.
• The programming will cancel
if no buttons are pressed after
5 seconds. This may require
restarting the process.
button to cancel