Table of Contents
Advertisement
3
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
1920 x 1080. When the monitor is
powered on at a different resolution, an
alert is displayed on screen: Use 1920 x
1080 for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
4
Firmware
The over-the-air (OTA) firmware update
is through the SmartControl software
and is easily downloadable through the
Philips website. What does SmartControl
do? It is an additional software that
helps control the photo, audio, and the
other on-screen graphic settings of the
monitor.
In the "Setup" section, you can check
which firmware version you currently
have and if you need to upgrade or not.
In addition, it is important to note that
the firmware upgrades must be done
through the SmartControl software.
It is necessary to be connected to a
network when updating the firmware on
SmartControl over-the-air (OTA).
Physical Function
5
Tilt
0°
Pivot
Note
The monitor can be used in portrait mode
by placing it on its right side to allow
access to the controls and ports. Please
choose extended mode on the setting
of your laptop/PC when you use portrait
mode for the first time on the monitor.
9
90°
Advertisement
Table of Contents
