Printer Specifications - Canon Arizona 135 GT Operation Manual

Printer Specifications

Introduction
Your Arizona 135 GT printer is capable of producing large format images on various rigid and
flexible media. The printers consist of a flatbed vacuum table and moving gantry. Media is held
flat and stationary on the vacuum table during printing. The gantry contains a carriage that
sweeps across the table as the gantry moves in steps along the length of the table to print an
image on the media. A Roll Media Option is available to facilitate printing on roll media.
NOTE
All specifications in this document are subject to change without notice.
Feature
Printing Technology
Maximum Media Size
Maximum Print Size
Media Thickness
Media Weight
Nozzle Drop Volume:
User Interface
Curing System
Power Requirements
Refer to the PSDS available
"http://down-
from the
loads.cpp.canon/"
Compressed Air
Environmental Conditions
BTU output
Hardware Interface
Image Processing Software ONYX
Size/Weight
Representative Manufacturing and Marketing for the Arizona 135 GT in Europe:
Canon Production Printing Netherlands B.V.
Van der Grintenstraat 10,
5914HH Venlo
The Netherlands
Telephone: 31 77 359 2222
Fax: 31 77 354 4700
Specification
Piezoelectric inkjet with VariaDot imaging technology
2.5m (98.4") x 1.25m (49.2")
2.51m (98.8") x 1.26m (49.6")
Maximum: 50.8 mm (2.0")
Maximum: 34 kg/m² (7 lbs/ft²)
Variable droplet sizes: 6 to 30 picolitres
LCD flat-panel monitor and mouse on a user positioned podium.
UV LED curing lamps with variable power settings.
2 x 200-240 Vac
50/60Hz
Circuit Breaker: North America 20A, European Union 16A.
Pressure (max): 827 kpa (120 psi)
Peak flow: 57 litres/min (2 cfm) at 690 kpa (100psi)
Temperature: 18ºC to 30ºC (64ºF to 86ºF).
Relative humidity: 30% to 70% (Non-condensing)
Room Ventilation Rate (minimum): 1200m³/hr / 700 cfm (mini-
mum)
Altitude: 2,000m (6,560 ft) maximum
7,510 BTU per hour (2200 watts) maximum
USB, Ethernet TCP/IP, 10/100/1000 Base-T.
®
Thrive™ version 21 (Canon Version)
5.0m (196.9") x 2.0m (78.7"), weight: 885 kg (1,951 lbs)
Table height: 0.88m (34.6") / overall height: 1.3m (51.2")
Printer Specifications
Chapter 1 - Introduction 13