Setting Up The Display; Connecting Your Display - Dell P8624QT User Manual

Setting Up the Display

Connecting Your Display

WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions.
To connect your display to the computer:
1. Turn off your computer.
2. Connect the HDMI/DP/USB Type-C/USB cable from your display to the computer.
3. Switch on your display.
4. Select the correct input source at Display OSD Menu and turn on your computer.
Optiplex (Optional)
Attaching the Optiplex
• Open the carton, take out the Optiplex holder
and accessories box .
• Included accessories: Cables, Remote Control &
Batteries, Remote control holder , Stylus, Wire
Saddle and manual.
1. Remove cable cover.
2. Insert the Optiplex PC and power adapter into
the respective compartments.
3. Plug in the cables and route the cables using the
cable management hooks that is within the PC
box holder.
Setting Up the Display | 25