Advertisement
2 : USER SETTING
1. Add Users
2. Delete User
3. System Settings
Light up the touch screen and press [*] twice, please use the Administrator Fingerprint or Password
for verification to enter the main menu. Entering the main menu must be verified by entering the
administrator information. After entering the main menu, users can select the operation according to
the menu number and press the corresponding numeric key.
2.1 : ADD FACE
a.
Press [*] twice to enter Admin Mode, press [1] to add user, and then press [1] to add user's face.
b.
Follow the voice prompts to enter the front face, right part of face, left part of face, bottom part
of face and top part of face in the face recognition area, and wait until you hear the voice prompt
"add successfully", which means the user's face is added successfully.
2.1 : ADD FINGERPRINT
The user places a finger on the fingerprint sensor. When hearing the voice prompts "Please enter
fingerprints again", the user places the same finger on the sensor. It will give you the voice prompts
"Add successfully. If you continue to add, please press the [#] key, and please the [*] key to exit."
CAUTION
a.
To enter a fingerprint, the user needs to record the fingerprint 4-6 times continuously.
b.
When collecting fingerprints, try to collect as many times as possible from different locations on
the same finger, so that the subsequent verification of fingerprints is easier to be recognized.
2.2 : ADD PASSWORD
The user enter a 6-digit password, press [#] to confirm, and when hearing the voice prompts "Please
enter the same password again", the user enter the same password. It also supports the dummy
password function. The user can add random numbers before and after the correct password to
achieve password input and verify unlocking.
CAUTION
For verification, it can include up to 32 digits dummy password, only one set of password can be
included which can not be repeated.
2.3 : ADD RFID CARD
The user shall put the induction card close to the antenna receiving area, and it will give the voice
prompts "add successfully".
1. Add Face
2. Add Fingerprint,
1
Password or RFID Card. If
You Add Password, Please
Press [#] to confirm
1. Promp: Please Record
1
Positive Face.
2. Please add Fingerprint,
2
Password or RFID Card
Advertisement
