Table of Contents
Advertisement
Assembly/installation
3.1 Safety information
Tools
You need the following tools and aids to install the flame arrestors:
• for all devices
– SW 21 open end wrench
• for CALOMAT 62F
– PTFE thread seal tape according to DIN EN 751-3 class F or class FRp
Connection for OXYMAT 6F and CALOMAT 6F
To install the flame arrestors, proceed as follows:
1. Remove the protective plug, the union nut and the clamp rings from the sample gas inlet and
outlet.
2. Remove the flame arrestor with adapter from the packaging and remove the protective plug.
22
①
Sample gas inlet and outlet
②
Clamp rings
③
Union nut
④
Protective plug
Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
Compact Operating Instructions, 09/2018, A5E45779389002-01
Advertisement
Table of Contents
