Table of Contents
Advertisement
Award BIOS Setup
CPU Latency Timer:
When enabled this item, the CPU cycle will only be deferred after it has been
held in a "Snoop Stall" for 31 clocks and another ADS# has arrived. When
disabled, the CPU cycle will be deferred immediately after the GMCH
receives another ADS#.
The choice: Enabled, Disabled.
Delayed Transaction:
The chipset has an embedded 32-bit posted write buffer to support delay
transactions cycles.
specification version 2.1.
The choice: Enabled, Disabled.
CRT LCD Switch:
This item allows you to select CRT or LCD display. The default is "CRT
Only".
The choice: LCD Only, CRT Only and Simultaneous, CRT Only.
AGP Graphics Aperture Size:
This field determines the effective size of the Graphic Aperture used for a
particular GMCH configuration. It can be updated by the GMCH-specific
BIOS configuration sequence before the PCI standard bus enumeration
sequence takes place. If it is not updated then a default value will select an
aperture of maximum size.
The choice: 4, 8, 16, 32, 64, 128 and 256
Disk On Chip Address:
Select this item allows the Disk On Chip address at D0000H-DFFFFH.
The choice: D0000H-DFFFFH, D4000H-D7FFFH, D8000H-DBFFFH,
DC000H-DFFFFH
All manuals and user guides at all-guides.com
Select "Enabled" to support compliance with PCI
42
Advertisement
Table of Contents
