Adjusting The Image; Turn On The Projector; Display The Test Pattern - Epson V11H604320 Installation Manual

6 Adjusting the Image

To ensure the best image quality, follow the steps below to adjust the projected image.
Do not make adjustments with the Quick Corner or Keystone functions of the
projector. Doing so may result in a reduction in image quality.
When using the BrightLink 575Wi/585Wi/575Wi+/585Wi+ and PowerLite 570/575W/580/585W, follow these
guidelines for setting up the projector:
•
Make sure the image is evenly rectangular, without distortion.
•
Make sure the projector is tilted no more than ±3° vertically and horizontally in relation to the projected
image.
A

Turn on the projector

Using the Remote Control
B

Display the test pattern

1. Press the [Help] button.
Using the Remote Control
2. Press the [ ] button on the remote control, or the [Wide] button on the control panel.
The test pattern is displayed.
Using the Remote Control
Using the Control Panel
Using the Control Panel
Using the Control Panel
34