Advertisement
2
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
3
I f your image looks like
to one side of the screen at an angle. Place it directly in front of the
screen, facing the screen squarely.
4
I f your image looks like
the projector to correct it.
3
Choose a
Presentation Method
How do you want to get images to the projector?
•
T o connect to a notebook, see "If
connecting to a notebook" below.
•
T o project over a wireless network,
see "If projecting wirelessly" on the
back of this sheet.
•
T o give a presentation stored on a flash drive, digital camera, or
other USB storage device, see the EasyMP Operation Guide on your
projector CD.
If connecting to a notebook...
1
T urn on the projector and adjust the image as described in sections
1 and 2 of this sheet.
2
D o one of the following:
•
C onnect one end of the VGA computer cable to the projector's
blue Computer (Component Video) port.
C onnect the other end to your notebook's video-out port
or
monitor port. Switch your notebook to external display.
•
C onnect the square end of the USB cable to the projector's
Type B (square) USB port.
C onnect the flat end of the USB cable to any available USB port
on your notebook (Windows
one-time driver file.
or
, you've placed the projector off
or
, press the
VGA computer cable
only). Click Agree to install a
®
Zoom
or
buttons on
USB cable
(Windows only)
Turn over
Advertisement
