Operating the ICIM
Using the ICIM
Once the module is installed, it runs without the aid of an operator. Unless alarms
are generated or your system configuration changes, you should not need to make
any adjustments to the module beyond the initial setup.
To Access the ICIM LCD Contrast
To access the ICIM LCD contrast control from the MAIN menu, press the
Use the
ICIM MAIN Menu
A few seconds after power-up, the MAIN menu (shown below) appears. Press the
SEL
key to select the specific option.
Display
Offline
Modules
Alarms
Scroll
Module
Shelf
Slot
78-4019959-01 Rev D
key to increase or the
Description
Indicates TNCS communication status with the ICIM.
Indicates the number of modules in the ICIM domain.
Displays the number of modules that are in alarm. Selecting this option
allows scrolling through all modules in alarm condition.
Allows scrolling through all modules in the ICIM domain.
Allows selection of any specific module in the ICIM domain.
key to decrease ICIM display contrast.
Operating the ICIM
ICIM
key.
49