Panasonic NI-GSG060 Operating Instructions Manual page 4

Table of Contents

Advertisement

Available languages

Available languages

WARNING
The plug must be removed from the socket-outlet
before the water reservoir is filled with water.
Also, disconnect the power plug during emptying,
cleaning and not in use.
- Failure to do so may cause electric shock or fire due
to electrical leakage resulting from insulation
deterioration.
CAUTION
Do not store the power cord in a twisted state.
- Doing so may cause breakage to the wire of the
cord, and may cause electric shock or fire due to a
short circuit.
Do not use the product when the steamer head down.
- Otherwise there will be hot water droplets out, so may
cause scalds.
Don't touch the hot surface (such as nozzle,
steamer holder , hose and the hot surface
around it ).
- Doing so may cause scalds.
Do not touch the steam during use.
- Doing so may cause scalds.
Do not place the power base sidelong.
-
Doing so may cause
water leakage, and then
damage floors and carpets.
06
Do not place the stamer head directly on the
power base and floor.
- Doing so may cause
damage the product, floors and
carpets.
Do not turn the steamer head upside-down or
incline it.
-
Doing so may cause
the product to fall, injury or
burns.
Do not use the product with hose or power cord
entangled.
- Doing so may cause the hose damage, electric
shock and fire.
Do not insert pins into the nozzle.
- Doing so may cause fire, electric shock, or burn.
Do not add perfume, vinegar, starch, descaling
agents, ironing aids or other chemicals in the
water reservoir.
- They can stain fabrics; instead, use room
temperature water for it.
Do not put the nozzle too close to you or others
since steam may unexpectedly erupt from it.
- Doing so may cause scald.
Do not move the product by pulling the hose.
- Doing so may cause the hose damage, electric
shock and fire.
CAUTION
When moving the product, do not come to bring
the product through the hanger.
- Otherwise it may cause the product to fall, injury.
Do not use the appliance with the exception of
fabric (e.g. leather).
- Doing so may cause damage it.
Do not move the power base until it have fully
cooled down.
- Doing so may cause scald.
Do not use the product with the hose is
compressed and clogged.
- Otherwise the hot water comes out from the base
and damage the floors and carpets.
Do not use the product when the hose is not
properly installed in the base, do not pull out the
hose during use.
- Doing so may cause burns.
Do not use any ironing accessories available on
the market.
- Doing so may cause burns or damage to cloth due
to incorrect operation.
Do not use the steamer near walls or furniture
that cannot withstand high temperature or
humidity.
- Doing so may damage the wall or furniture.
Unplug the power plug to disconnect from a
household outlet by grasping the power plug.
- Failure to do so may cause fire, electric shock or
Injury.
Use the product only for its intended purpose, for
ironing fabrics. To protect against burns or injury
to persons, do not steam fabrics while being on
the body.
- Failure to do so may cause injury.
Care should be taken when using the appliance
due to the emission of steam.
- It may cause scald.
Test on an inconspicuous area when using with
expensive or specially processed items.
- Failure to do so may cause damage fabric.
When the steamer head is placed on the steamer
holder, set the telescopic pole to the maximum.
- Otherwise steamer head due to fall, cause damage
the product or injury.
When removing the water reservoir, make sure the
power button is off, and do not touch the remain
water on the base.
- Doing so may cause burns.
Ensure fill the water tank following the instructions
(See Page 9 《HOW TO FILL WATER》).
Ensure clean and descale the appliance following
instructions (See Page 11 《CLEANING》 and
《SCALES CLEANING》).
07

Advertisement

Table of Contents
loading

Table of Contents