Toro Flex-Force Power System 81805 Operator's Manual page 11

1. The battery pack is charging.
2. The battery pack is fully charged.
Setup
Mounting the Battery Charger (Optional)
If desired, mount the battery charger securely on a wall using the
wall-mount key holes on the back of the charger.
Mount it indoors (such as a garage or other dry place), near a power
outlet, and out of the reach of children.
Refer to Figure 3
Slide the charger over the appropriately positioned hardware to secure the
charger in place (hardware not included).
for assistance in mounting the charger.
145-3129
3. The battery pack is over or under the
appropriate temperature range.
4. Battery pack charging fault
Figure 3
11
decal145-3129
g290534