Table of Contents
Related Manuals for Siemens WT43H07LDN
Summary of Contents for Siemens WT43H07LDN
- Page 1 Tumble dryer WT43H07LDN User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety ........... 4 9 Programmes ...... 21 1.1 General information.... 4 9.1 Automatic programmes... 21 1.2 Intended use...... 4 9.2 Timed programmes .... 22 1.3 Restriction on user group.. 4 10 Accessories...... 24 1.4 Safe installation ...... - Page 3 15.2 Base unit ....... 32 15.3 Moisture sensor..... 34 16 Troubleshooting...... 36 17 Transportation, storage and disposal ........ 40 17.1 Preparing the appliance for transportation ...... 40 17.2 Disposing of old appliance ... 40 18 Customer Service.... 41 18.1 Product number (E-Nr.) and production number (FD)..
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
-
Page 7: Safe Use
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. - Page 8 en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
-
Page 9: Safe Cleaning And Maintenance
Safety en ▶ Rinse the laundry thoroughly with warm water and detergent be- fore drying it in the machine. ▶ Do not use the appliance if industrial chemicals have been used to clean the laundry beforehand. WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. - Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
-
Page 11: Preventing Material Damage
Preventing material damage en Foam and foam rubber may deform 2 Preventing material or melt during the drying process. Do not dry laundry that contains damage ▶ foam or foam rubber. Unsuitable cleaning products may ATTENTION! damage the surfaces of the appli- The functionality of the appliance ance. -
Page 12: Energy Saving Mode
en Installation and connection Spin the laundry in the washing ma- 4 Installation and con- chine before drying. nection a Damper laundry extends the pro- gramme duration and increases energy consumption. 4.1 Unpacking the appliance Observe the programme's maximum ATTENTION! load capacity. Objects remaining in the drum that → "Programmes", Page 21 are not designed for operation with a If the maximum load is exceeded,... -
Page 13: Requirements For The Install- Ation Location
Installation and connection en Replace the accessories in ques- ▶ Installation loca- Requirements tion before operating the appli- tion ance. On the floor Place the appli- → "Accessories", Page 24 ance on a clean, level and firm Included with Description surface. the appliance Align the appli- Tumble dryer ance... -
Page 14: Aligning The Appliance
en Installation and connection Installation loca- Requirements tion Against a wall Do not trap the hoses and power cord between the wall and the ap- pliance. 4.4 Aligning the appliance In order to reduce vibrations and noises, align the appliance correctly. To align the appliance, turn the ap- ▶... -
Page 15: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Ventilation opening Door Maintenance flap on the base Condensation container... -
Page 16: Control Panel
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 21 Programme selector → Page 25 Display → Page 17 Buttons → Page 19... -
Page 17: Display
Display en 6 Display The display shows the current settings, options or relevant information. Display Designation Description 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. 0:45 Timed programme The timed programme is set. → "Timed programmes", Page 22 Programme end → "Buttons", Page 19... -
Page 18: Dryness Level
en Display Display Designation Description Fluff filter Clean the fluff filter → Page 26. Filter system on Clean the filter system on the base unit the base unit → Page 28. Drying Programme status Dryness level: Iron Programme status Dryness level: Programme status Cupboard Dry Anti-crease Programme status Pause... - Page 19 Buttons en 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause 3 sec. ¡ Activate Activate or deactivate the childproof lock. ¡ Deactivate Disable the control panel to prevent unwanted or accidental operation.
-
Page 20: Changing The Dryness Level
en Dryness level 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Cupboard Dry Multi-layered, thick laundry The laundry is dry. Plus that does not dry readily. -
Page 21: Programmes
Programmes en 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle. -
Page 22: Timed Programmes
en Programmes Programme Description Max. load (kg) ¡ If you dry the pillows and the pillows are not completely dry at the end of the programme, dry the pillows with a timed programme. → "Timed programmes", Page 22 Outdoor Dry weatherproof and outdoor clothing with a membrane coating and water-repel- lent fabrics. - Page 23 Programmes en Programme Description Max. load (kg) Time Program Warm Dry all types of fabric except for wool and 30' silk. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry. The programme duration is 30 minutes.
- Page 24 en Accessories 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 41. Order number Connection kit To save space, stack the WZ11410 appliance on a suitable washing machine of the same width and depth and that is from the...
-
Page 25: Preparing The Laundry
Laundry en Turn the programme selector and 11 Laundry set the required programme. → "Programmes", Page 21 If required, adjust the programme 11.1 Preparing the laundry settings. ATTENTION! 12.3 Loading laundry Objects remaining in the laundry may damage the laundry and the drum. Note: To prevent creasing, note the Remove all items from any pock- ▶... -
Page 26: Adding Laundry
en operation Press 12.10 Fluff filter The activated programme end time During drying, fluff from the laundry is is paused. collected in the fluff filter. The fluff fil- Press until the display shows ter protects the appliance from fluff. the required programme end time. Press Cleaning the fluff filter The changed programme end time... - Page 27 operation en Remove the fluff from the recess. Remove the fluff. Ensure that no fluff falls into the air Clean the two fluff filters thoroughly channel. under warm, running water and Disconnect the two-part fluff filter. then dry them off. Open the two fluff filters. Close the two fluff filters and put them together.
-
Page 28: Filter System On The Base Unit
en operation Insert the two-part fluff filter. Carefully remove the filter mat from the retainers. Close the door. Ensure that you do not deform or damage the filter mat. 12.11 Filter system on the Use a soft brush to clean the heat base unit exchanger cover. -
Page 29: Condensation Container
operation en Clean the filter mat thoroughly un- 12.12 Condensation con- der warm, running water and tainer squeeze it out by hand. Condensation forms during drying, which your appliance uses for auto- matic cleaning. By default, the con- densation is collected in the appli- ance's condensation container. -
Page 30: Childproof Lock
en Childproof lock Empty the condensation container. a The display shows a The control elements are locked. a The childproof lock remains active even after the appliance has been switched off and in the event of a power cut. 13.2 Deactivating the child- proof lock Requirement: To deactivate the childproof lock, the appliance must... -
Page 31: Basic Settings
Basic settings en 14 Basic settings You can configure the basic settings for your appliance to meet your needs. 14.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 32: Changing The Basic Set- Tings
en Cleaning and servicing 14.2 Changing the basic set- Remove all de- Fresh deposits tergent residue, are easier to re- tings spray residue or move without Set the programme selector to po- other residues leaving any sition 1. immediately. residue. Leave the appli- This allows the ance door open residual water to... - Page 33 Cleaning and servicing en Open the lever for the heat ex- Use a soft brush to clean the heat changer cover. exchanger cover. Make sure that you remove all dirt Pull out the heat exchanger cover from the seal. by the handle. Carefully clean the fins on the heat exchanger with a vacuum cleaner and brush attachment.
-
Page 34: Moisture Sensor
en Cleaning and servicing Clean the opening with a soft, Close the maintenance flap. damp cloth. 15.3 Moisture sensor Close the base unit → Page 34. The moisture sensor in this appliance Closing the base unit measures how damp the laundry is Requirement: The base unit is open. during the drying cycle. - Page 35 Cleaning and servicing en Clean the moisture sensor with a sponge.
-
Page 36: Troubleshooting
en Troubleshooting 16 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 37 Troubleshooting en Fault Cause and troubleshooting Creasing. Set the suitable programme for the type of fabric. ▶ → "Programmes", Page 21 Easy-Care fabrics are dried for too long. → "Changing the dryness level", Page 20. ▶ → "Adjusting the dryness level", Page 20. ▶ Anti-Crease not activated. Activate the Anti-Crease function. ▶...
- Page 38 en Troubleshooting Fault Cause and troubleshooting The length of the pro- The programme operation is optimised electronically. gramme changes dur- This may change the programme duration. ing the drying cycle. Not a fault – no action required. ▶ Pumping noise. Condensation pump active. Not a fault –...
- Page 39 Troubleshooting en Fault Cause and troubleshooting Water is leaking from The lever for the heat exchanger cover is not closed the appliance. correctly. Ensure that the lever for the heat exchanger cover ▶ is closed correctly. → "Closing the base unit", Page 34 The laundry is too Unsuitable programme for the type of fabric.
-
Page 40: Transportation, Storage And Disposal
en Transportation, storage and disposal Insert the condensation container 17 Transportation, stor- → Page 30. age and disposal Disconnect the appliance's mains plug from the power supply. a The appliance is now ready to be 17.1 Preparing the appliance transported. for transportation 17.2 Disposing of old appli- ATTENTION! ance If the appliance is operated immedi-... -
Page 41: Customer Service
Customer Service en Information about current disposal 18.1 Product number (E-Nr.) methods are available from your and production number specialist dealer or local authority. (FD) This appliance is la- You can find the product number (E- belled in accordance Nr.) and the production number (FD) with European Directive on the appliance's rating plate. - Page 42 en Consumption values 19 Consumption values The Cotton Eco programme The actual values may deviate from (denoted by the arrow symbol) is the indicated values depending on suitable for drying cotton laundry with the type of fabric, composition of a normal dampness level, and is the laundry to be dried, residual moisture most efficient programme for drying in the fabric, set degree of dryness,...
-
Page 43: Technical Data
Technical data en Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Cotton Iron Dry 12.0 1400 1:33 0.83 Cotton Iron Dry 12.0 1000 2:37... - Page 44 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001791410* 9001791410 (021222)