Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Electrolux EWW1042ADWA
Summary of Contents for Electrolux EWW1042ADWA
- Page 1 EWW1042ADWA WASHER - DRYER USER MANUAL WI-FI CONNECTIVITY SETUP...
-
Page 2: Table Of Contents
Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the Electrolux manufacturer’s warranty in the event that your product fault is due to failure to adhere to this manual. - Page 3 5. DAILY USE - WASHING (Only) 11. CARE AND CLEANING Loading The Laundry ....19 11.1 External Cleaning ......29 Using Detergent And Additives ... 19 11.2 Descaling ........29 Options Setting ......20 11.3 After Each Wash ......29 Starting A Cycle ( ....
-
Page 4: Safety Information
SAFETY INFORMATION 1.1 Conditions Of Use This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working ● environtment; farm houses; ● by clients in hotels, motels, and other residential type ●... -
Page 5: Child Safety
1.2 Child Safety This Wahser-Dryer is not intended for use by young ● children or infirm persons without supervision. Young children should be supervised to ensure that ● they do not play with the appliance. The packaging components (e.g. plastic film, ●... -
Page 6: Installation
● Under no circumstances should you For safety reasons do not use double adaptors, extension attempt to repair the machine yourself. Repairs carried out by cords and multi-plug adapters. inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre. - Page 7 ● ● The users should always check that If it is unavoidable that fabrics contain they have not left their gas lighters vegetable or cooking oil or have been contaminated by hair care products (disposable or otherwise) in their clothing. be placed in washer-dryer, it should first be washed in hot water with extra ●...
-
Page 8: Product Description
PRODUCT DESCRIPTION 2.1 Parts Worktop Detergent/Softener Control Panel Dispenser (see page 10) (see page 19) Door Cabinet Drain Pump Filter Front Panel (see page 30) Level Adjustment Feet (Front) Mains Cable Transit Bolts Transit Bolts & Hose Support Water Inlet Hose... -
Page 9: Accessories
Detergent/Softener Dispenser (For more informations, see page 19, 29) Transit Bolt (when remove) Prewash Main Wash Softener Door (when open) (for more informations, see page 19) Drum Lifter Transit bolts must be removed before using the appliance. Stainless Steel Washing Drum 2.2 Accessories Plastic Caps To close the holes on... -
Page 10: Control Panel
CONTROL PANEL 3.1 Control Panel Description Program Selector Knob Delay Start Touchpad Spin Selection Touchpad Child Lock Option Temperature Selection Touchpad Prewash Touchpad Display Save Favourite Program Option Time Dry Touchpad Vapour Touchpad Dryness Level Touchpad SensorWash Touchpad Start/Pause and Add Clothes Touchpad... -
Page 11: Program Chart
3.2 Program Chart Max. Max. Load Type of load and soil level Program; Temperature Spin (Dry Clothes) range Speed Wash Cottons; 1400 10 kg 6 kg White and coloured cotton. Cold to 90°C Mixed; 1200 Synthetic or mixed fabric items. 4 kg 3 kg Cold to 60°C... -
Page 12: Program Options Compatibility
Program; Max. Max. Load Type of load and soil level Spin (Dry Clothes) Temperature range Speed Wash 1200 1 kg 1 kg Non-Stop washing and drying program for WashDry 60; 3 - 5 shirts with lightly soil. 30°C, 40°C Favourite –... -
Page 13: Options
3.4 Options ) Touchpad Select “ ” option to turn Wash/Dry Mode Touchpad ON the sensors for the dirt and detergent residue. This touchpad is used to select Program Mode of your machine. Program mode The “SensorWash” is switched ON available are : by default. - Page 14 Delay Start Touchpad Vapour ( ) Touchpad Select this option to add approximately This option makes it possible to delay the 30 minutes of tumbling in vapour during start of the program by 30 min, 60 min or the wash cycle. Vapour helps open fabric...
-
Page 15: Dryness Level Touchpad
Remote ( ) Touchpad WI-FI specification requirements: This option allows you to connect washer-dryer to Wi-Fi network and to link Frequency 2.4 GHz according to it to your smart phone. local country regulation By this functionality you can receive notifications, control and monitor your Protocol IEEE 802.11b/g/n washer-dryer from your mobile devices. - Page 16 Time Dry ( ) Touchpad ● If you wish to carry out a timed drying At the end of the program the program, keep pressing this touchpad appliance performs the anti-crease until the desired time is reached. phase for approximately 10 minutes.
-
Page 17: Settings
3.5 Settings ● To deactivate the function, press and hold “Prewash” touchpad about 2 seconds until the display shows the Save Favourite ( ) Program icon “ ”. Program settings that are frequently used can be saved (e.g. Cotton, 60°C, 1200 rpm, with Prewash and Vapour). -
Page 18: Before First Use
Add Clothes ( To interrupt a program which is running, press this touchpad to pause You can only add clothes when the machine, the Start/Pause pilot the icon “ ” shown on the light flashes. display. To restart the program from the point... -
Page 19: Daily Use - Washing (Only)
DAILY USE - WASHING (Only) 5.1 Loading The Laundry 5.2 Using Detergent And Additives Turn the water tap on. Please read “Detergents Type Connect the main plug to the main and Quantity of Detergent”on socket. page 26 before use. Press the On/Off button to turn on the Detergent Dispenser Drawer Wahser-Dryer. -
Page 20: Options Setting
When you use the liquid − Close the drawer gently. detergent NOTE − Do not use gelatinous or thick liquid detergents. The softener amount used must not − exceed the “MAX” mark in the Do not put more liquid than the drawer. -
Page 21: Starting A Cycle ( )
5.4 Starting A Cycle ( 5.7 Changing The Options To start a program, press the Start/Pause It may be possible to change some of the touchpad. The corresponding pilot light options after a program has started. will stop flashing and a default program Press the touchpad Start/Pause. -
Page 22: At The End Of The Program
5.9 At The End Of The Program To drain the water: Press the “Start/Pause ” touchpad. − The appliance stops automatically. The appliance drains the water and − The acoustic signal will operate. spins with the maximum spin speed −... -
Page 23: Daily Use - Drying (Only)
DAILY USE - DRYING (Only) Press the On/Off button to turn on the At the end of the program : machine. The acoustic signal will operate. The water tap must be open The display will show “ ” and and the drain hose must be “Anti Crease ( )”... -
Page 24: Washing Program + "Time Dry " Option
● When “Iron Dry At the end of the program press the ” option is selected, On/Off button to switch the machine off. the display time will be adjusted after approximately 15 minutes from the At the end of each drying cycle,... -
Page 25: Washing Hints
WASHING HINTS 8.1 Sorting The Laundry Wash bras, pantyhose and other delicates in a Follow the wash code symbols on each mesh laundry bag, garment label and the manufacturer’s which you can purchase washing instructions. Sort the laundry as from your supermarket. follows: whites, coloureds, synthetics, delicates, woollens. -
Page 26: Detergents Type And Quantity Of Detergent
Oil based paint: moisten with benzine Low sudsing detergents designed for stain remover, lay the garment on a soft front load washing machines are labelled cloth and dab the stain; treat several “Front Loading”, “high efficiency”, “HE”, times. such as Cold Power for Front Loaders or “Matic”. -
Page 27: Drying Hints
Not enough detergent causes: Use less detergent if: the washload to turn grey, you are washing a small load, greasy clothes. the laundry is lightly soiled, large amounts of foam during washing. Too much detergent causes: oversudsing, reduced washing effect, inadequate rinsing. -
Page 28: Additional Drying
9.5 Additional Drying If the laundry is still damp at the end of the drying program, select a short drying cycle again. WARNING! Do not over dry the laundry in order to avoid creasing of fabrics or garments shrinking. -
Page 29: Care And Cleaning
CARE AND CLEANING 11.5 Cleaning The Dispenser WARNING! Drawer You must DISCONNECT the appliance from the electricity supply, before you can The washing powder and additive carry out any cleaning or maintenance dispenser drawer should be cleaned work. regularly. Remove the drawer by pressing the 11.1 External Cleaning catch downwards and by pulling it out. -
Page 30: Cleaning The Drawer Recess
Flush it out under a tap to remove any WARNING! traces of accumulated powder. 1. Disconnect the mains plug from the mains socket. 2. Do not remove the filter while the appliance is operating. Do not clean the drain pump if the water in the appliance is hot. - Page 31 3. When the container is full of water, 5. Remove fluff and objects from the put the drainage duct back again and pump (if there are any). empty the container. Do step 2, 3 again and again until no more water flows out from the drain pump.
-
Page 32: Cleaning The Water Inlet Filter
Clean the filter in the inlet hose with Put the filter back into the housing a stiff brush. with exposed section facing up. Make sure that you correctly tighten the filter to prevent leakages. Guide Remove the inlet hose behind the appliance. -
Page 33: Frost Precautions
11.9 Frost Precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Emergency Drain Disconnect the main plug from the main socket. -
Page 34: Troubleshooting
12. TROUBLESHOOTING 12.1 Possible Failures Certain problems are due to lack of Alarm Code: simple maintenance or oversights, The appliance does not fill with water which can be solved easily without properly. calling out an engineer. Before contacting your local The appliance does not drain the water. - Page 35 Malfunction Possible cause Solution The drain hose is squashed or Check the drain hose kinked. (Error code: connection. The drain pump is clogged. Clean the drain filter. Machine (Error code: does not empty and/or The option “Rinse Hold” Press Start/Pause does not has been selected.
- Page 36 Malfunction Possible cause Solution The laundry is not evenly Pause the machine and distributed in the drum. redistribute laundry manually. Machine vibrates or is There is very little laundry in the Load more laundry. noisy: drum. Unstable floors eg. wooden floors.
- Page 37 Malfunction Possible cause Solution The “Time Dry” or the “Dryness Select the drying time or Level” degree has not been the dryness level degree. selected. The water tap is not turned on. Open the water tap. (Error code: Machine does not dry The drain filter is clogged.
-
Page 38: Emergency Door Opening
12.2 Emergency Door Opening In case of power failure or appliance failure, the appliance door remains locked. The wash program continues when power is restored. If the door remains locked in case of failure, it is possible to open it using the emergency unlock feature. -
Page 39: Technical Data
TECHNICAL DATA Dimensions (Height / Width / Depth) 85 X 60 X 65.9 cm Power supply (Voltage / Frequency) 220-240 V~ / 50 Hz Total power absorbed Wash: 2100 W / Dry: 1500 W Water supply pressure (Maximum / Minimum) 0.8 MPa / 0.05 MPa Washing Drying... - Page 40 Remove the cardboard top. Put one of the polystyrene packaging elements on the floor behind the Remove the polystyrene packaging appliance. Carefully put down the materials. appliance with the rear side on it. Remove the plastic bag which cover Make sure not to damage the hoses.
-
Page 41: Positioning
Remove the three transit bolts. 11. Pull out the plastic spacers. 14.2 Positioning It is important that your Wahser-Dryer stands firm and leveled on the floor to ensure correct operation. The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to avoid restricting the Wahser-Dryer door. -
Page 42: Water Inlet
14.3 Water Inlet Loosen or tighten the feet to adjust the level. A correct adjustment of the Connect the water inlet hose to a tap appliance level prevents vibration, noise with 3/4” BSP thread. and the movement of the appliance when in operation. - Page 43 Fitting Hose Guide In a sink, drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above Pull apart to the ground. Hose bend insert hose. Guide hose Max. 90 cm pull hose Min.
-
Page 44: Electrical Connection
14.5 Electrical Connection Should the appliance power supply cable need to be This machine is designed to operate on replaced, this shall be carried a 220-240 V, single-phase, 50 Hz supply. out by our Service Centre. “An incorrect power supply may void When the appliance is installed, the your warranty.”... -
Page 45: Wi-Fi Connectivity Setup
It is the one that begins with “AJ-“ – (it may take a few moments * Minimum requirements: iPhone6/iOS 9.3/Android 5.1 and above. You will need to install the Electrolux Life App, to appear). create an Electrolux account and accept the Terms and Conditions and Electrolux’s Privacy Policy in the App to... - Page 46 Congratulations! Press the Start/Pause button to Now you’re all set up. You can start activate the Remote Start. exploring the Electrolux Life App. Now it is possible to start the program remotely. Deactivate Remote Start Press the Remote touch button.
- Page 48 www.electrolux.com...