Table of Contents
Advertisement
- Aero units
Shows the current selection. To change the aero units setting:
1)
Tap the aero units panel.
2)
Tap the required aero units radio button. The aero units radio button panel closes and the aero
units panel shows the selected units.
- Altitude correction
Shows the current selection. To change the altitude correction setting:
1)
Tap the altitude correction panel, a numbered keypad is displayed.
: Enter a positive correction factor when ADTS is below the aircraft reference. Enter a nega-
NOTE
tive correction factor when ADTS is above the aircraft reference.
2)
On the numbered keypad, select the required altitude correction setting.
3)
Tap the "Tick" icon, the numbered keypad closes and the new altitude correction setting is
displayed in the altitude correction setting panel.
4)
Tapping the "Cross" icon, cancels the action and closes the numbered keypad.
PS1-PS2 differential limit in 3 channel operation
The default value for the Ps1-Ps2 limit is 84.66 mbar (2.5 inHg) and can be changed via the hand
terminal.
Figure 3-15: PS1 - PS2 Limit (3 Channel Only)
S
ETTINGS
72
Advertisement
Table of Contents
