INACCURATE. COPIES OF COPYRIGHTED INFORMATION MAY ONLY BE MADE FOR LEGALLY PERMISSIBLE PURPOSES. Sony Electronics Inc. reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement.
Sony VAIO® computer. Record the model and serial number in the space provided here, and keep in a secure location. Refer to the model and serial numbers when you call your Sony Service Center. Model Number: Serial Number:...
See the online specification sheet for details on your installed optical drives. For questions regarding your product or for the Sony Service Center nearest you, visit the Sony Computing Support Web site at http://www.sony.com/pcsupport ❑...
Page 5
Pour changer la pile de rechange, veuillez contacter votre centre de service Sony le plus près. Avertissement : L’utilisation d’instruments optiques avec ce produit augmente les risques pour les yeux. Puisque le faisceau laser utilisé...
Declaration of Conformity Trade Name: SONY Model No.: PCV-2220 PCV-2222 Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Rd Oradell, NJ 07649 Telephone: 201-930-6972 This phone number is for FCC-related matters only. This device complies with Part 15 of the FCC rules.
Sony Customer Information Service Center at 1-888-4-SONY-PC (1-888-476-6972), or write to the Sony Customer Information Center, 12451 Gateway Blvd., Fort Myers, FL 33913, or find Sony Customer Service on the Web at http://www.sony.com/pcsupport. If this equipment is causing harm to the telephone...
viii VAIO Computer System Reference Manual Telephone Consumer Protection Act of 1991 (United States) The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains, in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and...
Disposal of Lithium Battery You can return your unwanted lithium batteries to your nearest Sony Service Center or Factory Service Center ✍ In some areas, the disposal of lithium batteries in household or business trash may be prohibited. For the location of the Sony Service Center nearest you, visit the Sony Computing Support Web site at http://www.sony.com/pcsupport.
VAIO Computer System Reference Manual Industry Canada Notice This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed 5.
Contents Notice ... ii Owner’s Record... iii Safety Information and Caution ... iv Regulatory Information... vi FCC Part 68 ... vii Telephone Consumer Protection Act of 1991 (United States) ... viii Telephone Consumer Guidelines (Canada)... viii Disposal of Lithium Battery ...ix Industry Canada Notice...x Avis de l’Industrie Canada...x Chapter 1 —...
Page 12
VAIO Computer System Reference Manual Chapter 3 — Upgrading and Maintaining Components... 25 Removing the Cover ...26 Removing the cover ...26 Replacing the cover...28 Installing an Add-on Card ...29 About the Lithium Battery...32 Replacing the lithium battery...32 About Installing Memory...35 Removing a memory module...35 Installing a memory module ...36 Installing Memory Modules ...38...
Page 13
Chapter 6 — Miscellaneous Technical Information ... 65 User and Supervisor Passwords ...66 Beep Code Error Messages ...67 PCI Configuration Status and Error Messages ...68 DMA Channel Assignments ...69 System I/O Address Map (PCV-RS310) ...70 System I/O Address Map (PCV-RS320) ...72 Memory Map (PCV-RS310) ...74 Memory Map (PCV-RS320) ...75 IRQ Settings (PCV-RS310)...76...
Chapter 1 Identifying Components The following sections identify and describe each component that is visible from the exterior of the VAIO® computer. Your computer's components may vary, based on the model and features you purchased. For details on the hardware configuration of your system, see the online specifications sheet.
VAIO Computer System Reference Manual Buttons and Switches Button or switch Optical disc eject button Floppy disk eject button Power on/off button S400 Description Automatically opens and closes the assigned optical drive tray. Ejects a floppy disk. Turns system power on, off, or into Standby mode. Optical disc eject Floppy disk eject Power on/off...
Indicators Power Standby Indicator Floppy disk drive access indicator Hard disk drive and optical disc drive access indicators Power indicator (VAIO) Standby indicator Identifying Components S400 Description Light is green while reading and writing data from and to a floppy disk. Light is amber while reading and writing data.
VAIO Computer System Reference Manual Ports i.LINK 4-pin S400 port Port i.LINK® S400 port (IEEE 1394) USB1, USB2 ports To connect to a 6-pin i.LINK device, use the i.LINK port on the back of the system. A 6-pin i.LINK cable can supply power from the computer to the device if the device also has a 6-pin i.LINK port.
Rear View PCV-RS320 series model AC Input port Mouse port Keyboard port Printer port VGA Monitor port i.LINK 6-pin S400 port Universal Serial Bus (USB 2.0) ports (4) Microphone, Headphones, and Line In jacks Monitor (DVI) port Telephone Line jack Modem Line jack Identifying Components Speaker DC Out jack...
VAIO Computer System Reference Manual PCV-RS310 series model AC Input port Mouse port Keyboard port Universal Serial Bus (USB 2.0) ports (2) Ethernet port VGA Monitor port Printer port i.LINK 6-pin S400 port Serial port Headphones jack Line In jack Microphone jack Telephone Line Jack Modem Line Jack...
Identifying Components Icon Labels PCV-RS320 series model Icon Label Area MONITOR Icon Label Area...
Page 24
VAIO Computer System Reference Manual PCV-RS310 series model Icon Label Area Icon Description Mouse port Keyboard port VGA Monitor port Printer port i.LINK® S400 (IEEE 1394) port Icon Label Area...
Icon A DVI monitor port is available on selected models only. † For PCV-320 series models only. Identifying Components Description Ethernet port (for LAN connection only) Universal Serial Bus (USB 2.0) port Microphone jack Headphones jack Line In jack (audio) Monitor (DVI) port Telephone jack Modem line jack...
VAIO Computer System Reference Manual I/O Connectors The following section identifies the various I/O connectors. Keyboard and Mouse Ports The keyboard and mouse ports are physically identical and have the same pinout. They are standard 6-pin PS/2® compatible female ports. USB Ports The USB ports are 4-pin USB 2.0 ports.
Page 27
Printer Port The printer port is a standard 25-pin DB-25 female port. VGA Monitor Port The monitor port is a standard 15-pin female high-density VGA-type port. Identifying Components...
Page 28
Line Line S/P DIF Optical Out Port The Plastic Optical Fiber (POF) output port for the Sony®/Phillips Digital Interface (S/P DIF) can be used to connect compatible audio or video equipment, such as CD/DVD players or MiniDisc recorders. Line In Description Electret condenser microphone input.
Page 29
6 watts. ✍ i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK connection may vary, depending on the software applications, operating system and compatible i.LINK devices. All products with an i.LINK connection may not communicate with each other.
VAIO Computer System Reference Manual Expansion Slots There are five expansion slots; however, four slot covers are visible from the back panel (see “System Board” Expansion Slot No. PCV-RS320 series model on page 49). Description Available for expansion (PCV-RS310 only). Occupied by a AGP BUS card (PCV-RS320 only).
Chapter 2 Configuring Your System This chapter contains information on configuring your system. ❑ Making changes to the BIOS settings. ❑ Making changes to the display's power management settings.
Reboot your computer by selecting Shut Down... from the Start menu, then select Restart. When the Sony logo appears, press F2. The AwardBIOS Setup Utility screen appears. Each menu presents options for modifying the system configuration. Use the left and right arrow keys to select a menu from the menu bar.
Changing Power Management Settings Power Management capability is designed to enable your computer to reduce power or shut itself off after being idle for a specified period of time. From the Start menu, click Control Panel, select Performance and Maintenance, then click Power Options. The Power Options Properties dialog box opens, with the Power Schemes tab displayed.
VAIO Computer System Reference Manual Select the power scheme that is most appropriate for the way you use your computer. To change a power scheme, change the settings for Turn off monitor, Turn off hard disks, System stand by, and System hibernates. The Turn off monitor option enables you to specify the period of inactivity (in minutes) that you want to elapse before your monitor turns off when your computer is running on AC power.
Page 35
Click the Advanced tab. Select the desired settings. Configuring Your System...
Page 36
VAIO Computer System Reference Manual Click the Hibernate tab. Select the settings most appropriate for your system.
Page 37
Click the UPS tab. The UPS tab enables you to select and configure an Uninterruptible Power Supply (UPS) device for your system. ✍ A UPS device is an optional accessory not supplied with your system. Select the settings most appropriate for your system and click OK. For more information about configuring a UPS device, refer to the Microsoft®...
Chapter 3 Upgrading and Maintaining Components This chapter describes upgrade and maintenance procedures. System configuration may vary, depending on the model purchased. Your computer may not include all of the hardware features shown in the illustrations of this section. Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral devices, shut down the computer, and unplug the power cord.
VAIO Computer System Reference Manual Removing the Cover Removing the cover Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and disconnect any peripheral devices. Position the system unit so that the back panel is facing towards you. Unscrew the three cover release screws located on the edges of the back panel and set aside.
Page 41
Upgrading and Maintaining Components When the screws are removed, the cover is released. Slide the cover towards the back of the unit to remove it. Removing the cover If you remove the cover immediately after you shut down your computer, the components may be too hot to touch.
VAIO Computer System Reference Manual Replacing the cover Carefully align the cover to the chassis frame. The cover should align evenly against the chassis. Slide the cover firmly onto the unit, sliding it forward until the cover snaps into place. Replace the release screws.
✍ Add-on card configuration varies by model. Some models, such as Configure-to-Order (CTO) systems, may contain preinstalled add-on cards. Observe the proper safety precautions when you add cards to your Sony computer. Installing an add-on card Shut down your computer and turn off all peripheral devices, such as your printer.
Page 44
VAIO Computer System Reference Manual Removing/Installing the slot cover Install the add-on card by inserting it into the expansion slot and securing it with the screw from the expansion slot cover.
Page 45
Upgrading and Maintaining Components Installing an add-on card Attach any internal cables that the card requires. See the instructions supplied with the add-on card. Replace the cover. See Reconnect the power cord and all peripheral devices. Turn on the computer. “Replacing the cover.”...
VAIO Computer System Reference Manual About the Lithium Battery The lithium battery starts to weaken after several years and the system settings, such as the date and time stored in CMOS RAM, may become inaccurate. Replace the lithium battery when this occurs. There is danger of the battery exploding if it is replaced incorrectly.
Page 47
Upgrading and Maintaining Components Installing a lithium battery (PCV-RS320 series model) Battery Holder Tab Battery Holder...
Page 48
You can return your unwanted lithium batteries to your nearest Sony Service Center or Factory Service Center. To locate a Service Center near you, visit the Sony Computing Support Web site at http://www.sony.com/pcsupport...
Upgrading and Maintaining Components About Installing Memory The amount of preinstalled memory may vary, depending on the system configuration you purchased. Your computer may ship with all available memory slots filled. See the online specifications sheet for details about the amount and type of memory installed in your computer. ✍...
VAIO Computer System Reference Manual Removing/Installing memory (PCV-RS310 series model shown) Latch Installing a memory module Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and any peripheral devices. Remove the cover. See Gently place the unit on its side.
Page 51
Upgrading and Maintaining Components Press down evenly against the module's upper corners. The latches snap into position, holding the module in place. To avoid damaging a memory module slot, move the end latches slightly outward to relieve pressure. The module clicks into place. Reinstall any components or add-on cards you may have removed.
VAIO Computer System Reference Manual Installing Memory Modules Your system supports DDR-SDRAM memory modules. See the "Specifications" chapter for details on the type of memory your system supports. The DDR-SDRAM memory modules can be single- or double- sided and installed in either socket. Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral devices, shut down the computer, and unplug the power cord.
Page 53
Upgrading and Maintaining Components Remove the new memory module(s) from its anti-static package. Hold the memory module only by its edges to prevent static- electricity damage. Align the module over the appropriate slot, noting the location of pin 1 on the module and pin 1 on the slot. Motherboard (PCV-RS320 series model shown) ✍...
Page 54
VAIO Computer System Reference Manual Press down firmly and evenly at both corners until the module is fully seated. ✍ When the module is fully seated, the latches on each side are upright and locked into the slot on each side of the module. If the latches are not upright, continue to press down gently on each side of the module until the latches lock into place.
Upgrading and Maintaining Components Covering an Open I/O Slot Slot covers prevent air from escaping through the empty slot. If air escapes, the components inside the computer cannot be properly cooled. This may damage some components, especially the main processor, which generates the most heat.
Add to Cart. Click Continue to Check Out, and follow the on-screen instructions to complete your purchase. ✍ If you are not able to access the Sony Direct Accessories and Parts Center Web site, contact a customer service representative at 1-800-488-7669.
Upgrading and Maintaining Components Installing an additional hard disk drive Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and any peripheral devices. Remove the cover. See Configure the jumpers on the new drive as a slave. See the configuration instructions supplied with your drive.
Page 58
VAIO Computer System Reference Manual Slide the new drive into the drive holder and align the holes on each side of the drive to the holes in the drive holder. Secure the drive to the drive holder with screws, through the holes on each side of the drive holder.
Upgrading and Maintaining Components Replacing the drive holder Replace the cover. See Reconnect the power cord to your computer. Identifying the additional hard disk space When you initialize the new hard disk, it must be configured as an extended partition in Windows NT file system (NTFS) format. Log on to Windows®...
Page 60
VAIO Computer System Reference Manual Click on the Unallocated area of the disk and then right-click to display a shortcut menu. Select New Partition. The New Partition wizard appears. Follow the wizard’s on-screen instructions to complete the process. The Windows® XP operating system recognizes the new hard disk drive and applies the NTFS format.
Upgrading and Maintaining Components Removing the Power Supply Remove the power supply when you insert a memory module (see “Installing Memory Modules” Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral devices, shut down the computer, and unplug the power cord.
VAIO Computer System Reference Manual Replacing the Power Supply Rotate the power supply down and slide it into the chassis along the rails to each side of the chassis until the tab snaps into position. Replace the screw that secures the power supply to the rear of the chassis.
Chapter 4 System Board This chapter identifies and describes components on the system board. Motherboard for (PCV-RS320 series model) Processor CPU Power Supply Keyboard, Mouse Printer Monitor, i.LINK USB5, USB6 Optical Out USB3, USB4 Ethernet Microphone In Line In Line Out CD-In Aux-In Slot No.
VAIO Computer System Reference Manual Memory Module (DDR-DIMM) Slots PCV-RS320 series model Motherboard shown* * The PCV-RS310 series model has only two memory module slots on the motherboard. See the "Specifications" chapter for details. Memory module (DDR-DIMM) 1 1 1 1 Indicates pin 1 Align pin 1 of the Dual Inline Memory Module DDR-SDRAM DIMM to the small triangle located on the memory module slot of the system...
VAIO Computer System Reference Manual CLR CMOS Jumper There is one user-configurable jumper for CMOS Clear. The computer ships with CMOS Clear in the Normal position. Do not change the position of this jumper unless directed by a technical support person.
Chapter 5 CMOS Setup Options This chapter describes each screen in the BIOS Setup Utility (see “Accessing the BIOS Setup Utility” The BIOS setup has five menu items on the menu bar. These are: ❑ Main ❑ Advanced ❑ Power ❑...
Page 68
VAIO Computer System Reference Manual Press F10 to save the changes and exit, or press Esc to discard the changes. Follow the on-screen prompts for other choices. The bottom of the screen presents a summary of the keys to use for navigation and control.
Main Screen Main Screen (PCV-RS310 series model) System Time System Date Primary Master Primary Slave Secondary Master Secondary Slave Supervisor Password User Password Installed Memory BIOS Revision Main Screen (PCV-RS320 series model) System Time System Date Primary Master Primary Slave Secondary Master Secondary Slave AMI BIOS...
Page 70
VAIO Computer System Reference Manual IDE Sub-Menus (PCV-RS310 series model) I DE Sub-Menus Type Translation Method † Cylinders † Heads ‡ Sectors CHS Capacity Maximum LBA Capacity Multi-Sector Transfers SMART Monitoring PIO Mode ULTRA DMA Mode †† Set Device As * This option appears when Type is set to User Type HDD.
Page 71
IDE Sub-Menus (PCV-RS320 series model) IDE Sub-Menus Type LBA / Large Mode Block Multi-Sector Transfers PIO Mode SMART Monitoring 32 Bit Data Transfer CMOS Setup Options [Auto] Not Installed CD-ROM ARMD [Auto] Disabled [Auto] Disabled [Auto] [Auto] Disabled [Disabled] Enabled...
VAIO Computer System Reference Manual Advanced Screen Advanced Screen (PCV-RS310 series model) CPU Speed I/O Device Configuration Onboard AC97 Audio Controller Onboard AC97 Modem Controller Onboard 1394 Controller Onboard LAN Controller Onboard Serial Port 1 Onboard USB 2.0 Controller Onboard Parallel Port Parallel Port Mode ECP DMA Select PCI Configuration...
Page 73
Advanced Screen (PCV-RS320 series model) Onboard Devices Configuration (see CPU Configuration Hyper Threading Technology * CPU Speed may vary, depending on the model purchased. CMOS Setup Options “I/O Device Configuration” [Enabled] Disabled on page 58)
Page 74
VAIO Computer System Reference Manual Onboard Devices Configuration Sub-Menu (PCV-RS320 series model) Onboard Devices Configuration Sub-Menu Onboard LAN Controller Onboard LAN Boot ROM Onboard 1394 Controller Onboard AC97 Audio Controller Onboard AC97 Modem Controller Parallel Port Address Parallel Port Mode Parallel Port IRQ [Enabled] Disabled...
Power Screen Power Screen (PCV-RS310 series model) Power Up Control AC Power Loss Restart Wake/Power Up On External Modem [Disabled] Wake on LAN Hardware Monitor CPU Temperature Power Screen (PCV-RS320 series model) After AC Power Failure Wake On LAN Hardware Monitor CPU Temperature MB Temperature Chassis Temperature...
Chapter 6 Miscellaneous Technical Information This chapter contains information on the following subjects: ❑ User and Supervisor password ❑ Beep code error messages ❑ PCI configuration status and error messages ❑ DMA channel assignments ❑ System I/O address map ❑ Memory map ❑...
VAIO Computer System Reference Manual User and Supervisor Passwords The system allows you to specify up to two passwords (a User password and a Supervisor password) in the CMOS Setup Utility. The User password is required; the Supervisor password is optional. Access to the CMOS Setup Utility depends on which passwords were previously set, as indicated next.
During a normal boot, a single short beep signifies that the system is OK. Other beep patterns signify errors. The number of beeps indicates the specific error that occurred. If a system error occurs, the Sony Online Support technicians require the number of beeps your system produces.
VAIO Computer System Reference Manual PCI Configuration Status and Error Messages The following is a list of status and error messages that may appear on your system from time to time. Message Floppy Disk Controller Resource Conflict CMOS Checksum Error, CMOS Cleared CMOS Data Invalid, CMOS Cleared...
DMA Channel Assignments This shows the factory default values. The Windows® operating system reassigns resources to best meet the needs of a particular configuration. Resource Channel 4 Channel 2 Miscellaneous Technical Information Device Direct memory access controller Standard floppy disk controller...
Page 85
Resource 0x000003F2-0x000003F5 0x000003F6-0x000003F6 0x000003F7-0x000003F7 0x000003F8-0x000003FF 0x000004D0-0x000004D1 0x000004D6-0x000004D6 0x00000778-0x0000077B 0x00000A79-0x00000A79 0x00000D00-0x0000FFFF 0x00008000-0x0000807F 0x00008400-0x000084FF 0x00008800-0x0000883F 0x00009000-0x000090FF 0x00009400-0x0000940F 0x0000B800-0x0000B8FF 0x0000D000-0x0000D01F 0x0000D400-0x0000D41F 0x0000D800-0x0000D81F 0x0000E400-0x0000E47F 0x0000E800-0x0000E81F 0x0000EC00-0x0000EC3F 0x0000EC80-0x0000EC8F 0x0000ECC0-0x0000ECCF 0x0000ECD0- 0x0000ECDF 0x0000ECF0-0x0000ECFF ✍ I/O addresses that may be used by add-on cards are not listed. Miscellaneous Technical Information Device Standard floppy disk controller...
VAIO Computer System Reference Manual IRQ Settings (PCV-RS310) Resource Device System timer Standard 101/102-Key or Microsoft® Natural PS/2® Keyboard Communications Port (COM1) Standard floppy disk controller System CMOS/real time clock PS/2 Compatible Mouse Numeric data processor Primary IDE Channel Secondary IDE Channel Intel®...
IRQ Settings (PCV-RS320) Resource Miscellaneous Technical Information Device System timer Standard 101/102-Key or Microsoft® Natural PS/2® Keyboard Intel® 82801EB SMBus Controller - 24D3 Standard floppy disk controller System CMOS/real time clock Microsoft® ACPI-Compliant System Microsoft® PS/2® Mouse Numeric data processor Primary IDE Channel Secondary IDE Channel Intel®...
Chapter 7 Specifications This chapter describes the technical specifications for your computer. Processor See online specifications sheet for details Chipset See online specifications sheet for details PCI Bus PCI Level 2.2, 33 MHz zero wait state 2 PCI slots open for expansion (See online specifications sheet for details) AGP BUS (PCV-RS320 series models only) AGP Interface specification, version 3.0 (supports (2x / 4x / 8x) One AGP Slot...
VAIO Computer System Reference Manual Memory Modules Installed memory Maximum memory Voltage Pins Memory type Memory Configurations Memory module configurations (MB) PCV-RS310 Series PCV-RS320 Series * Your computer ships with at least 256 MB of memory. Your model may ship with more than 256 MB DDR- SDRAM depending on the configuration you purchased.
Audio Sound chip Wave synthesis Audio sampling rate Rear panel connectors Communications Modem i.LINK® (IEEE 1394) Ethernet Installed modem may vary, depending on the system configuration purchased. † This modem is capable of downloading at 56 Kbps. Your phone service, online service, or Internet Service Provider may not support this technology or operate at this speed.
VAIO Computer System Reference Manual I/O and Expansion Slots Printer port Modem jack Telephone jack USB 2.0 ports PCI slots CNR Modem slot IDE headers i.LINK® (IEEE 1394) ports Universal Serial Bus (USB) 2.0 technology supports high/full/low speeds. Floppy Disk Drive and Controller Drive Floppy disk controller Floppy disk drive...
Optical Drives Drive Optical drive #1 Optical drive #2 System BIOS Make and model Passwords Power management Advanced features Plug and Play devices Special features Specifications Description See online specifications sheet for details See online specifications sheet for details Award-based for PCV-RS310 series models AMI-based for PCV-RS320 series models 2 Mb Flash-ROM User and supervisor passwords supported...
Index address map, system audio specifications beep codes BIOS Setup Utility BIOS setup utility advanced screen boot screen exit screen main screen options power screen screens BIOS specifications caution lithium battery CMOS - See BIOS CMOS Clear configuration jumper CMOS RAM codes, beeps communications, specifications computer...
Page 100
VAIO Computer System Reference Manual Giga Pocket initialize additional hard disk drive graphics controller - See graphics graphics specifications hard disk drive initializing additional hard disk space installing an additional hardware installing additional hard disk drive headphones connector i.LINK connector address map slot specifications I/O connectors...
Page 101
passwords, user and supervisor PCI Add-on Card inserting power management, configuring printer connector RAM - See system memory rear view I/O connectors icons removing unit cover Replacing the cover resetting date and time resolution - See graphics setup, BIOS slot - See I/O slot specifications audio BIOS...