Bosch 300 Series Use And Care Manual page 41

Issue
Tea residue or lip-
stick marks on dish-
ware.
There are colored
coatings (blue, yel-
low, brown) inside
the appliance or on
stainless steel dish-
ware that are diffi-
cult or impossible to
remove.
Plastic parts inside
the appliance are
discolored.
Plastic parts are dis-
colored.
Cause and troubleshooting
Dishwashing temperature is too low.
Select a program with a higher dishwashing
▶
temperature.
Too little detergent is being used or is unsuitable.
Use a suitable Detergent and follow the manu-
▶
facturer's instructions for the amount to be
used.
Dishware has been precleaned too intensively.
Then the sensors choose a lighter cycle. Stub-
born remnants cannot be entirely removed.
Only remove large remnants of food and do not
▶
pre-rinse dishware.
The formation of films is due to substances con-
tained in vegetables (cabbage, celery, potatoes,
noodles, etc.) or tap water (manganese).
Clean the appliance.
▶
You can remove coatings with Mechanical
cleaning → Page 32 or a machine cleaning
product. It may not always be possible to com-
pletely remove coatings but they are harmless
to health.
The formation of films is due to metal components
on silver or aluminum dishware.
Clean the appliance.
▶
You can remove coatings with Mechanical
cleaning → Page 32 or a machine cleaning
product. It may not always be possible to com-
pletely remove coatings but they are harmless
to health.
Plastic parts inside the appliance may become
discolored over the life of the dishwasher.
Discoloration may come about and will not im-
▶
pair functioning of the appliance.
Dishwashing temperature is too low.
Select a program with a higher dishwashing
▶
temperature.
Dishware has been precleaned too intensively.
Then the sensors choose a lighter cycle. Stub-
born remnants cannot be entirely removed.
Only remove large remnants of food and do not
▶
pre-rinse dishware.
Troubleshooting en-us
41