Cleaning; Removing Debris From The Machine - Toro 23208HD Operator's Manual

Figure 58
1. Nut
2. Tooth holder
g019862
3. Tooth

Cleaning

Removing Debris from the
Machine
Service Interval: After each use
Important:
Operating the engine with blocked
screens, dirty or plugged cooling fins, and/or
cooling shrouds removed will result in engine
damage from overheating.
1. Park the machine on a level surface, engage
the parking brake (if applicable), and lower the
grinder.
2. Shut off the engine, remove the key, and wait
for the engine to cool.
3. Wipe away debris from the air cleaner.
4. Clean any debris buildup on the engine and
muffler with a brush or blower.
Important:
It is preferable to blow dirt
out, rather than washing it out. If you use
water, keep it away from electrical items and
hydraulic valves. Do not use a high-pressure
washer. High-pressure washing can damage
the electrical system and hydraulic valves or
deplete grease.
5. Clean debris from the oil cooler.
40