Table of Contents
Advertisement
PVR
Record a programme
In DTV mode, press
the progamme. The recording function need connect
with a USB Hard Drive formatted on the TV.
To record the programme you are watching right now,
press (Record) key on the remote control, then the
recording will start immediately. When the
programme was recording , you can select ■ key to
stop it.
Open or delete the list of recording
Press
key and select PVR, press
Recorded List. Press / key to select the
recordings, and press OK key to play or press
on remote control to delete the selected recording file.
You can press EXIT key to quit the list.
Time-shift
Use Time-shift for a programme
In DTV mode, press key on the remote control ,time-
shift option menu will show on the screen, and the
program is in suspended status. press ■ key on the
remote control to stop and quit time-shift function.
When you leave program for a shor t time, time-shift
function can suspend and cache the playing program
to U disk. When you resume playing, the program can
continue to be played.
Replay
Since the TV stores the broadcast you are watching,
you can mostly replay the broadcast for a few
seconds.
When you pause the programme, you can press
(play) key to play normally.
(Record) key to begin recording
/
key to select
General Settings
Press
key to show main menu, select General
Settings and press OK key to enter.
- Eco Settings: press
Eco Settings.
- Channel list copy: copy the Channel list from USB or
TV.
- Hearing Impaired: press
the Hearing Impaired.
- Shop Mode: press
Shop Mode.
- Software info: Check the software version
information
key
-Factory Setting: you will rest all personal settings,the
channel installation remains unchanged.
-Restore Default: ALL setup and channels will be reset.
Software Update (USB)
You need a computer and a USB memory device to
upload the software on the TV. Use a USB memory
device with 256MB free space. Make sure that write
protection is switched off.
1. Download the TV software: 3663_DVBT_8M.bin
2. Choose a TV device
- Insert the USB memory into one of the USB
connections of the TV.
3. Start the update on TV
-
Settings > Software Update(USB)
Do not . . .
- use the remote control
- remove the USB memory device from the TV
If a power cut occurs during the update, never
remove the USB memory device from the TV. When
the power returns, the update will continue.
14
/
key to turn on or off the
/
key to turn on or off
/
key to turn on or off the
Advertisement
Table of Contents
