Table of Contents
Advertisement
Clock
Date and Time
Automatic
The standard setting for the TV clock is Automatic.
The time information comes from the broadcasted
UTC - Coordinated Universal Time information.
If the clock is not correct, you can set the TV clock
to Country Dependent. For some countries, you can
select a specific time zone or set a time offset. In
some countries, for some network operators, the
clock settings are hidden to avoid an incorrect clock
setting.
To set the TV clock...
1 - Press , select All Settings and press OK.
2 - Select Region and Language and
select Clock >
Auto Clock Mode and press OK.
3 - Select Automatic or Country Dependent and
press OK.
4 - Press (left) to go back one step.
Manual
If none of the automatic settings display the time
correctly, you can set the time manually.
However, if you schedule recordings from the TV
Guide, we recommend not to change the time and
date manually. In some countries, for some network
operators, the clock settings are hidden to avoid an
incorrect clock setting.
To set the TV clock manually (if available)...
1 - Press , select All Settings and press OK.
2 - Select Region and Language and
select Clock >
Auto Clock Mode and press OK.
3 - Select Manual and press OK.
4 - Press (left) and select Date or Time and
press OK.
5 - Press (up) or (down) to adjust the value.
6 - Press (left) to go back one step.
Time Zone
If none of the automatic settings display the time
correctly, you can set the time manually.
However, if you schedule recordings from the TV
Guide, we recommend not to change the time and
date manually. In some countries, for some network
operators, the clock settings are hidden to avoid an
incorrect clock setting.
To set the TV clock manually (if available)...
1 - Press , select All Settings and press OK.
2 - Select Region and Language and
select Clock > Auto Clock Mode and press OK.
3 - Select Manual and press OK.
4 - Press (left) and select Date or Time and
press OK.
5 - Press (up) or (down) to adjust the value.
6 - Press (left) to go back one step.
Remote Control Keyboard
To set the keyboard layout to Azerty...
1 - Press , select All Settings and press OK.
2 - Select Region and Language and
press (right) to enter the menu.
3 - Select Remote Control Keyboard and
press OK.
4 - Select Azerty or Qwerty and press OK.
5 - Press (left) repeatedly if necessary, to close
the menu.
23.7
Universal Access
Switch On
With Universal Access switched on, the TV is
prepared for use for the deaf, hard of hearing, blind or
partially sighted people.
Switch on
If you did not switch on Universal Access during the
installation, you can still switch it on in Universal
Access menu.
To switch on Accessibility...
1 - Press , select All Settings and press OK.
2 - Select Universal Access and press (right) to
enter the menu.
3 - Select Universal Access one step further.
4 - Select On and press OK.
5 - Press (left) repeatedly if necessary, to close
the menu.
Hard of Hearing
Some digital TV channels broadcast special audio and
subtitles adapted for the hard of hearing or deaf
people. With Hearing impaired switched on, the TV
automatically switches to the adapted audio and
subtitles, if available. Before you can switch
on Hearing impaired, you have to switch
on Universal Access.
To switch on Hearing impaired...
1 - Press , select All Settings and press OK.
79
Advertisement
Table of Contents
