Table of Contents
Advertisement
4.
Select the slots that are going to
be used for your Mezzanine card,
then use a screwdriver and pry the
corresponding slots until it pops off.
5.
Prepare the Mezzanine card.
6.
Insert the ports of the Mezzanine card into the mounting hole on the chassis, then
insert the golden connector of the Mezzanine card into the OCP connector on the
motherboard.
Ensure that the stand screws on the motherboard is aligned and matched to the screw
holes of the Mezzanine card.
OCP connector
Stand screws
7.
Secure the Mezzanine card with four bundled screws.
2-32
Ports
Mounting hole
Chapter 2: Hardware Information
Advertisement
Table of Contents
