Panasonic ERJ PA2 Series Manual

Anti-Surge Thick Film Chip Resistors
ERJ P, PA,PM type
ERJ PA2, PA3, P03, P06, P08, PM8, P14
Features
● ESD surge characteristics superior to standard metal film resistors
: Metal glaze thick film resistive element and three layers of electrodes
● High reliability
● Suitable for both reflow and flow soldering
● High power 0.20 W : 0603 inch / 1608 mm size (ERJP03)
0.20 W : 0402 inch / 1005 mm size (ERJPA2)
0.33 W : 0603 inch / 1608 mm size (ERJPA3)
0.50 W : 0805 inch / 2012 mm size (ERJP06), 1210 inch / 3225 mm size (ERJP14)
0.66 W : 1206 inch / 3216 mm size (ERJP08)
● High precision, High voltage, High resistance value (ERJPM8)
: Limiting element voltage 500 V, Resistance tolerance ±1 %, TCR ±100 (x 10
● Reference standard
● AEC-Q200 compliant
● RoHS compliant
■ As for packaging methods, land pattern, soldering conditions and safety precautions,
please see data files.
Explanation of part numbers
Note : Please check the "Ratings" for the presence/absence of part numbers for combinations of the symbols below.
1 2 3
E R J
Product code Code
inch size
PA2
Thick film
chip resistors
PA3
P03
P06
P08
PM8
P14
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
: IEC 60115-8，JIS C 5201-8，JEITA RC-2134C
4 5 6
P 0 6
Resistance tolerance
0402 Code Tolerance
D ±0.5 ％
0603
F ±1 ％
0805 J ±5 ％
1206
1210
series
7 8 9
D 1 0
Nominal resistance value
Three digit type (±5 %),
Four digit type (±1 %, ±0.5 %)
Example:
222 : 2.2 KΩ
10R0 : 10 Ω
1002 : 10 KΩ
-6
/ K)
10 11 12
0 V
2
Packaging methods
Code Packaging
Punched carrier Ttaping
X
2 mm pitch, 10,000 pcs
Punched carrier taping
V
4 mm pitch, 5,000 pcs
Embossed carrier taping
U
4 mm pitch, 5,000 pcs
Part No.
ERJPA2
ERJPA3
ERJP03
ERJP06
ERJP08
ERJPM8
ERJP14
29-Sep-23