Page 1
Motorola T1I Series Digital Cordless Telephone For: T101I, T102I, T103I and T104I Warning: Charge the handset for 16 hours before use.
Page 2
Welcome… to your new Motorola T1I Digital Cordless Telephone! • 50 name and number phonebook • Bright backlit display • Speakerphone for hands-free conversations • Caller ID / Call Waiting • 40 name and number calls list • 10 different ringtones available for internal and external calls as well as the numbers stored in the phonebook •...
Page 3
This user guide provides you with all the information you need to get the most from your phone. To set up your phone, follow the simple instructions in ‘Getting started’, on the next few pages. Important Only use the telephone line cord supplied. Got everything? •...
Getting started ..............6 Getting to know your phone ........10 Using the phone ..............15 Switch the handset on / off ............15 Calls ..................... 15 3.2.1 Make a call ..................15 3.2.2 Preparatory dialling .................15 3.2.3 Receive a call ..................15 3.2.4 End a call .....................15 Hands-free ..................
Page 5
Low battery warning tone ............22 Out of range tone ................. 22 Lock / unlock the keypad ............23 Base settings ..............24 Change base PIN code ............... 24 Tone / Pulse dialling ..............24 Flash ....................24 Restore default settings ............. 25 Emergency reset ................
Getting started Location Important Do not place your in the bathroom or other humid areas. Place your base within reach of the mains power and telephone wall socket. The equipment should be installed near the socket-outlet and should be easily accessible.
Page 7
Connecting the base Plug the telephone line cord into the socket marked on the rear of the base. Plug the power adaptor into the socket marked on the rear of the base and plug the other end into the mains power wall socket. Switch on the mains power.
Page 8
4. When the handset is fully charged, will appear steady on the display. Plug the other end of the telephone line cord (make sure that one end is already plugged into the base) into the telephone wall socket. Connecting the handset and charger (for multi-pack only) If you have purchased a multiple pack, you will need to carry out this process for all the handsets and chargers.
Page 9
Battery Battery low warning flashes on the display and you hear a warning beep every minute during a call, you will need to recharge the handset before you can use it again. When charging, will scroll on the display. Battery performance In ideal conditions, fully charged batteries should give up to 10 hours talk time or up to 150 hours standby time on a single charge.
Getting to know your phone Overview of your handset A Earpiece B Display See page 12 for an overview of the display icons. C Redial / Volume / Up In standby mode, press to open the redial list, see page 17. During a call, press to increase the earpiece volume, see page 16.
Page 11
D Mute / Clear / Back During a call, press to turn mute on / off, see page 16. When in a menu, press to go back to previous menu level; press and hold to go back to standby mode. In editing mode, press to delete characters and digits.
Page 12
Handset LCD Display Time or Handset name In standby mode, press and hold to switch the handset idle screen between handset name or time. Display icons Flashes to indicate an incoming external call External call in progress. Flashes to indicate an incoming internal call Internal call in progress 3-way call in progress or transfer an external call to another T1I the base...
Page 13
For this feature to work, you must subscribe to Caller ID Service from your network operator. A subscription fee may be payable. Overview of the base A Paging/Find handset In standby mode, press to ring all handsets registered to the base. Press and hold to enter registration mode when registering handsets.
Page 14
Menu map PHONEBOOK HANDSET DATE -– TIME ADD ENTRY BEEP DATE SET MODIFY ENTRY INT RING VOL CLOCK SET EXT RING VOL ALARM SET DELETE ENTRY INT MELODY REGISTER SETUP EXT MELODY SELECT BASE DEL HANDSET AUTO ANSWER REG BASE PIN CODE NAME DIAL MODE...
Using the phone Note The handset will automatically time the duration of all external calls. The call timer will display after the first 15 seconds of the call. When the call ends, the total duration of the talk time stays on the display for 5 seconds. Switch the handset on / off Press and hold to switch the handset on or off.
3.3.2 Answer a call hands-free When the phone rings, press to answer the call. 3.3.3 Switch to hands-free during a call During a call, press to put the call on the loudspeaker. 2. To switch hands-free off and return the call to the earpiece, press again.
Note If there is no answer from the other handset and you wish to return to your external caller, press Your external call resumes automatically after 1 minute if there is no answer. 3.6.4 3-way conference call You can hold a 3-way conference call between 2 internal callers and 1 external caller.
3.7.3 Delete an entry Press to open the redial list. 2. Scroll to the entry you want and press . The display shows DELETE 3. Press to confirm or to cancel. 3.7.4 Delete the entire redial list Press to open the redial list. DELETE ALL 2.
Phonebook You can store up to 50 names and numbers in the phonebook. Names can be up to 12 characters long and numbers up to 24 digits. You can also select different ringer melodies for the phonebook entries. Store a name and number If the T1I is connected to a switchboard, you may need to enter a pause in a stored number.
View or dial an entry Press is displayed. 2. Scroll to the entry you want. Enter the first letter of the name to search alphabetically. The first name that starts with this letter or the nearest letter in the alphabet will be displayed.
Handset settings Handset ringer volume The handset ringer can be set to different volume levels for internal and external calls. Choose from 5 volume levels or off. HANDSET Press , scroll and press 2. Scroll to select INT RING VOL (internal ringer volume) or EXT RING (external ringer volume) and press...
Handset name If you are using more than one handset with your T1I base, you can set a personalized name for each handset to easily distinguish between them. A name can be up to 10 characters long. Press , scroll HANDSET and press NAME...
Lock / unlock the keypad You can use the menu to lock the keypad. Press , scroll HANDSET and press KEYLOCK ? 2. Scroll and press to confirm. The display shows Press and hold The display shows 2. To unlock the keypad, press any button on the handset. The display shows PRESS 3.
Base settings Change base PIN code Some functions are protected by a 4 digit PIN code which must be entered if you want to change the settings. The default PIN is 0000. You can change this to your own preferred number. When you enter a PIN, the digits are shown as ****.
Restore default settings You can restore your T1I to its default (original) settings. All the handsets that are registered to the base will be retained. Important Resetting your phone to its default settings will delete all entries in the calls and redial lists.
Clock & alarm If you have subscribed to your network’s Caller ID service, the date and time is set automatically for all handsets when you receive your first call. If you are not subscribed to a Caller ID service, you can set the date and time manually. To set date DATE -- TIME Press...
Caller ID and the calls list Important To use Caller ID, you must first subscribe to the service from your network provider. A subscription fee may be payable. To ensure that the caller’s name is displayed, make sure you have stored the full telephone number, including the area code in the phonebook.
5. Press again see the date and time of the call. 8.2.2 Dial a number in the calls list Press to open the calls list. 2. Scroll to the entry you want. 3. Press to dial the displayed entry. 8.2.3 Modify a calls list number Press to open the calls list.
Using additional handsets You can register up to 4 handsets to your T1I base to extend your phone system without having to install extension sockets for each new phone. Each handset can be registered with up to four bases. Then, select your preferable base.
4. Press to confirm. You will hear a confirmation beep and the display will return to the previous menu. De-register a handset Use one handset to de-register another. You cannot de-register the handset that you are using. SETUP Press , scroll and press DEL HANDSET 2.
Help No dial tone • Use only the telephone line cord supplied. • Check that the telephone line cord is connected properly. • Check that the mains power is connected properly and switched on. No display • Check that the batteries are inserted correctly and fully charged. Use only approved rechargeable batteries supplied.
Page 33
Cannot register a handset to the base • You can register up to a maximum of 4 handsets to a T1I base. You must de-register a handset in order to register a new one. • Check that you have entered the correct PIN code (default = 0000). •...
General information Important This equipment is not designed to make emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. This product is intended for connection to analogue public switched telephone networks and private switchboards in India. Important safety instructions Follow these safety precautions when using your phone to reduce the risk of fire, electric shock, and injury to persons or property:...
Page 35
Installation Guidelines • Read and understand all instructions and save them for future reference. • Follow all warnings and instructions marked on the product. • Do not install this product near a bath tub, sink, or shower. • Operate this phone using only the power source that is indicated on the marking label.
Page 36
(“MZGW”) What Does this Warranty Cover? Subject to the exclusions contained below, MZGW warrants that this Motorola branded product (“Product”) or certified accessory (“Accessory”) sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below.
Page 37
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR MZGW BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING...
Page 38
(c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola or MZGW are excluded from coverage.
Page 39
Technical Information How many telephones can I have? All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any one telephone line. Your T1I has a REN of 1.
Page 40
Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners.