Table of Contents
Advertisement
Product Overview
1. Power button/LED
2. USB-C port
3. USB-A port
Specifications
Battery Charger
Model
51860T
Type
60V MAX Lithium-Ion Battery Inverter
Watts
330W continuous, 450W momentary
surge
Input
60V DC
Output Wave
Modified sine wave
Form
AC Receptacle
120V AC ~2.5A, 60Hz
Output
USB Port Output*
USB-C
USB-A
*The USB ports share internal circuitry; if the USB-A
port is in use; the USB-C port supplies 5V output only.
Appropriate Temperature Ranges
Charge/store the battery pack
at
Use battery pack at
Use the tool at
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
Figure 3
4. AC receptacle
5. Battery pack latch button
6. Vents
8A
5V 2.4A, 9V 3A,
12V 2.5A, 20V
1.5A,
5V 3.4A, 9V 2A,
12V 1.5A
5°C (41°F) to 40°C (104°F)*
-30°C (-22°F) to 49°C (120°F)
0°C (32°F) to 49°C (120°F)*
Operation
Installing the Battery
1.
Ensure that the vents on the battery and inverter
are clear of any dust and debris
2.
Disconnect any devices attached to the inverter.
3.
Line up the cavity in the battery pack with the
tongue on the inverter
4.
Slide the battery pack into the inverter until it is
fully seated.
5.
To remove the battery pack, turn the power off,
then press down the latch button and slide the
battery up and away from the inverter.
g333934
1. Inverter vents
6
(Figure
(Figure
4).
Figure 4
4).
g333935
Advertisement
Table of Contents
