Cd-r/rw drive pack for cf-28 personal computer series (28 pages)
Summary of Contents for Panasonic CR-594-B
Page 1
CD-ROM DRIVE UNIT CR-594-B / CR-594-C INSTRUCTION MANUAL Please read through these instructions before operating this unit. Interface : ATAPI...
CD-ROM DRIVE UNIT CR-594-B / CR-594-C INSTRUCTION MANUAL Please read through these instructions before operating this unit. Interface : ATAPI * Model CR-594-B TABLE OF CONTENTS IMPORTANT SAFETY NOTICE 1. PRECAUTIONS WHEN OPERATING ..............A-3 1.1 PRECAUTIONS WHEN TRANSPORTING ............A-3 1.2 INSTALLATION LOCATION ................
(1) To prevent fire or electric shock, do not expose this appliance to rain or moisture. (2) To avoid electric shock or damage to the eyes due to laser beam, do not attempt to disassemble the cabinet. For USA (Model CR-594-B only) FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIO FREQUENCY INTERFERENCE STATEMENT Class B Computing Device NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 4
LASER SAFETY INFORMATION Class 1 LASER Product This equipment is certified to comply with DHHS Rule 21 CFR Chapter 1,Subchapter J in effect as of date of manufacture. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN60825 for Class 1 laser products.
Page 5
CD-ROM drive is read-only memory using an audio compact disc system as a media package which handles digital data. To enjoy audio CD, please insert the Headphone plug into the Headphone jack. (Model CR-594-B only) This drive unit uses CD-ROM discs which bear the following mark.
CHAPTER 1 PRECAUTIONS WHEN OPERATING 1.1 PRECAUTIONS WHEN TRANSPORTING To avoid damage * Keep the original packing materials for the drive unit. * Before you transport the drive unit, remove the disc from the drive unit and repack the drive unit in its original packing. 1.2 INSTALLATION LOCATION Do not place unit in the following environments.
Page 7
Do not write on, or paste paper to the surface of the disc. Should not paste any label to the outer back surface (the label side) of the disc, or it generates drive vibration due to imbalance of the disc. Do not store the disc in a place where the temperature is high.
CHAPTER 2 PARTS AND FUNCTIONS 2.1 FRONT VIEW DISC TRAY Accepts a disc. (Model CR-594-B only) HEAD PHONE JACK Headphone can be connected using a 3.5mm stereo mini plug. (Model CR-594-B only) VOLUME Adjusts audio output level of Headphone. BUSY INDICATOR Lights when data is being accessed from the disc, or the drive is playing an audio CD.
CHAPTER 5 GENERAL DESCRIPTION 5.1 FEATURE SUMMARY Embedded ATAPI Interface. Automatic Loading with tray. Horizontal and Vertical Installation. (Vertical : Vertical installation type only, 12 cm Disc only) Audio Playback Capability. 5 1/4" Half Height Design. 5.2 SYSTEM SET UP The ATAPI Devices are selected by the Address field in the Drive Select Register.
• Soft read errors Less than 10 • Hard read errors Less than 10 6.3 AUDIO PERFORMANCE (1) Analog audio (Headphone functions with Model CR-594-B only) Number of channels Frequency response 20 Hz ~ 20 kHz (Line-out) 100 Hz ~ 20 kHz (Headphone)
6.4 GENERAL PERFORMANCE Power requirement +5 V 1.5 A +12 V 1.8 A Dimensions (W x H x D) 146 x 41.3 x 190 mm (exclude Front Bezel) Weight 865 g typical 6.5 ENVIRONMENTAL CONDITIONS Operating Non-operating • Temperature 5 ~ 50 °C –...
APPENDIX Easy Installation of the Software for DOS / Windows 3.1 The CR-594-B/C CD-ROM drive must be installed into your host computer, before installing this software. 1. Turn the power of your personal computer on. If your system automatically loads Windows, you must exit Windows and reach the DOS prompt C:\.
Page 14
Weight and dimensions shown are approximate. Specifications are subject to change without notice. LMQT00437 Created in Japan Rev. A...